600W DIP Type High Input DC/DC Converter : DHFB600
DHFB600 - 600 Watts Full Brick Type 2:1 High Input Voltage Isolated DC - DC Converters
Description
Regulated Output DC-DC Converter- Isolation - Module
Our DHFB600 series is high efficiency 600W isolated and regulated output. The dimension is 4.6" x 2.4" x 0.5" meet industrial standard Full brick size. They provide a 300Vdc nominal input (with an input range of 180 to 425Vdc) and 3000VAC reinforced isolation, which are suitable for distributed power architectures, telecommunications, servers, base station, battery operated equipment, and industrial applications.Features
- 600W Isolated Output
- Efficiency to 91%
- Fixed Switching Frequency
- Input Under-Voltage Protection
- Over Temperature Protection
- Over Voltage/Current Protection
- Remote On/Off
- Single Wire Parallel
- Industry Full-Brick Package
- Fully Isolated 3000VAC
Specification
Input Voltage Range | Nominal 300V Range: 180-425V |
Input Over Voltage Protection | module on ... 480V typ. ; module off ... 500V typ. |
Undervoltage Lockout | 300Vin power up ... 170V ; power down ... 160V |
Logic Remote On/Off | open collector refer to -Vin Positive Remote Logic. Logic Low (Module OFF) .................< 1.2V Logic High (Module ON).................. Open circuit or 3.5~75V Negative Remote Logic. Logic High (Module OFF)................. Open circuit or 3.5~75V Logic Low (Module ON) .................< 1.2V |
Input Filter | Capacitive |
Voltage Accuracy | ± 1% max |
Transient Response | 25% step load change ... < 500 µs |
External Trim Adj. Range(Refer toMechanical Drawing Figure1 and Figure2) | 60%-110% |
Load Share Accuracy | ±10% at 50% to 100% Full Load |
Auxiliary Output Voltage/Current | 10±3Vdc/20mA max. |
R&N 20MHz BW(note3) | 12V ................ 75mV RMS max., 150mV pk-pk max. 24V .............. 120mV RMS max., 240mV pk-pk max. 48V ............. 200mV RMS max., 480mV pk-pk max. |
Temperature Coefficient | ± 0.03% / °C max. |
Short Circuit Protection | Continuous |
Line Regulation(note1) | ± 0.2% max |
Load Regulation(note2) | ± 0.5% max |
O.V.P. Trip Range, % Vo nom | 115% ~ 140% |
Current Limit | 105% ~ 125% Nominal Output |
Start up Time | 40ms typ. |
Isolation Voltage | Input/Output : 3000VAC min. Input/Case : 2500VAC min. Output/Case : 500VAC min. |
Isolation Resistance | 10M Ω min. |
Switching Frequency | 200 KHz Tpy. |
Operating Case Temperature | -40°C to 100°C |
Storage Temperature | -55°C to 105°C |
Thermal Shutdown, Case Temp. | 105°C Typ. |
Humidity | 95% RH max. Non Condensing |
MTBF | MIL-HDBK-217F, GB, 25℃, Full Load … 420Khrs typ. |
Dimensions | 4.60×2.40 x0.50 inches (116.8x61.0x12.7 mm) |
Case Material | Aluminum Base Plate with Plastic Case |
Weight | 230g |
Model
Model No. | I/P Vol. | O/P Vol. | O/P Current | O/P Watts (max.) |
DHFB600-C2 | 180-425 VDC | 12.0V | 50.0A | 600W |
DHFB600-C9 | 180-425 VDC | 24.0V | 25.0A | 600W |
DHFB600-C9B | 180-425 VDC | 48.0V | 12.5A | 600W |
DHFB600-C2N | 180-425 VDC | 12.0V | 50.0A | 600W |
DHFB600-C9N | 180-425 VDC | 24.0V | 25.0A | 600W |
DHFB600-C9BN | 180-425 VDC | 48.0V | 12.5A | 600W |
Ordering Information:
- Measured from high line to low line.
- Measured from full load to zero load.
- Output ripple and noise measured with min. capacitor 470uF and 1uF ceramic capacitor across output.
- An external input capacitor 330uF for all models are recommended to reduce input ripple voltage.