Product

12W DIP Type DC DC Converter Module : DW12 Series
  • Facebook
  • LINE
  • Twitter
  • Sina
  • LinkedIn
DIP Type DC-DC Converter

12W DIP Type DC/DC Converter : DW12

DW12 - 10~12 Watts DIL Type DC-DC Converter

Download
Description

DC-DC Converter-Module

12W Isolated Wide Input DC/DC Converter Modules with short circuit protection and UL 94V-0 package material (94v0 power supply).
Features
  • 12W DIL Type
  • 1500 VDC Isolation
  • 100% Burn in
  • High Efficiency
  • Short Circuit Protection
  • UL 94V-0 Package Material
Specification
Input Voltage Range 2:1 Input Range
Input Filter Pi Netowrk
Protection Fuse Recommended
Voltage Set-point Accuracy ±2% max.
Ripple & Noise¹ (20MHz BW) ± 0.05% / °C
Load Regulation² ±0.5% max.
Line Regulation³ ±0.5% max.
Minimum Load 20% of Full Load
Short Circuit Protection Continuous
Short Circuit Restart Automatic
Over Load Protection 110%~180%
Transient Response (25% step load change) 350uS max.
Efficiency 78% min.
Isolation Voltage (for 10 sec.) 1500 VDC min.
Isolation Resistance 10⁹Ωmin.
Isolation Capacitance 2200pF max.
Switching Frequency 400KHz min.
Conducted Emissions EN55022 Class A
Radiated Emissions EN55022 Class A
Operating Temperature (with derating) -40°C To +85°C
Storage Temperature -55°C To +105°C
Case Temperature +95°C max.
Humidity 95% max.
Cooling Free-Air Convection
Case Material Five-Side Shielded
Case Size L31.8mm x W20.3mm x H12.2mm
Weight 18.5g

Model
Model No. I/P Vol. O/P Vol. O/P Current O/P Watts (max.)
DW12-11 9~18VDC 5 VDC 2400mA 12W
DW12-12 9~18VDC 12 VDC 1000mA 12W
DW12-13 9~18VDC 15 VDC 800mA 12W
DW12-14 9~18VDC ±5 VDC ±1200mA 12W
DW12-15 9~18VDC ±12 VDC ±500mA 12W
DW12-16 9~18VDC ±15 VDC ±400mA 12W
DW12-21 18~36VDC 5 VDC 2400mA 12W
DW12-22 18~36VDC 12 VDC 1000mA 12W
DW12-23 18~36VDC 15 VDC 800mA 12W
DW12-24 18~36VDC ±5 VDC ±1200mA 12W
DW12-25 18~36VDC ±12 VDC ±500mA 12W
DW12-26 18~36VDC ±15 VDC ±400mA 12W
DW12-31 36~75VDC 5 VDC 2400mA 12W
DW12-32 36~75VDC 12 VDC 1000mA 12W
DW12-33 36~75VDC 15 VDC 800mA 12W
DW12-34 36~75VDC ±5 VDC ±1200mA 12W
DW12-35 36~75VDC ±12 VDC ±500mA 12W
DW12-36 36~75VDC ±15 VDC ±400mA 12W

Notices:

  1. Measured with 1uF ceramic capacitor connect to the output pins.
  2. Load Regulation is for output load current change from 20% to 100%.
  3. High line to low line.

Ordering Information:

  1. **Remote on/off: -ON 3.0……12V/DC or open circuit (referenced to -Vin) -OFF 0.0……12V/DC or short circuit (pin 1, pin 2 & pin 3) -OFF Idle Current……2.5mA
Mechanical Drawing (Unit: mm)
History
    3Inquiry