2.2 KW Bidirectional Power Inverter : BIC-2200

BIC-2200 2.2 KW bidirectional power supply with energy recycle function


Bidirectional Power Inverter

The BIC-2200 is a 2.2KW bidirectional power supply with enegy recycle function. It is fully digital and 1U height designed. It is designed to control the power transferred from AC grid to DC and DC to AC grid for energy recycle. The implementation of a bidirectional power supply of the BIC-2200 allows battey manufactures to charge the battery from AC grid and recycle the DC energy back into AC grid in one single unit. With built-in functions as active current sharing, remote ON/OFF control and CANBus mode available, the BIC-2200 provides vast design flexibility for battery formation & test equipment, V2G(Vehicle-to-grid) system, charging station, laser system and kinetic recovery system.
  • 1U low profile design
  • Fully digital design with 93% conversion efficiency for both AC/DC and DC/AC conversion
  • Ultra-fast bidirectional time of 1ms (AC/DC ↔ DC/AC)
  • CB/TUV/UL 62368-1 certified, circuit design in accordance with IEC 62477 regulation.
  • Up to 5 parallel applications supported up to 11000W (4+1)
  • <3% THDi in both conversion mode
  • Force charging and recycle mode with CAN Bus command (Optional)
  • Complete protections: Anti-islanding protection, AC anomaly protection, DC OVP, OLP, OCP, OTP
  • 5-year warranty
AC to DC Direction
AC Input Voltage Range 180~264VAC
Frequency Range 47~63Hz
Power Factor (Typ.) 0.98/230VAC at full load
Efficiency (Typ.) 90~93%
AC Current (Typ.) 11A/230VAC
AC Inrush Current (Typ.) Cold start 35A/230VAC
Leakage Current <2mA/230VAC
Total Harmonic Distortion < 3%(@load=100%/230VAC)
DC Voltage 12V, 24V, 48V, 96V
Rated Current 180A, 90A, 45A, 22.5A
Rated Power 2160W
Full Power Voltage Range 12~15V, 24~28V, 48~65V, 96~112V
Ripple & Noise (max.) 160mVp-p, 260mVp-p, 300mVp-p, 480mVp-p
Voltage Adj. Range 10~15V, 19~28V, 38~65V, 76~112V
Current Range 0~180A, 0~90A, 0~45A, 0~22.5A
Voltage Tolerance +/- 1%
Line Regulation +/- 1%
Load Regulation +/- 0.5%
Setup, Rise Time 1800ms, 60ms/230VAC at full load

DC to AC Direction
Rated Input Power 1800W
Full Power Voltage Range 12~15V, 24~28V, 48~65V, 96~112V
DC Voltage Range 10~15V, 19~28V, 38~65V, 76~112V
Max. Input Current 150A, 75A, 37.5A, 18.75A
Rated Output Power (Typ.)(@230V, 50Hz) 1725A
Voltage Range 180~264VAC determined by AC main
Frequency Range 47~63Hz determined by AC main
AC Current (Typ.) 7.5A/230VAC
Power Factor (Typ.) 0.99/230VAC at full load
Efficiency (Typ.) 90.5~93%
Total Harmonic Distortion < 3%(@load = 100%/230VAC)
O.L.P. 105% ~ 115% Rated output power. AC to DC: Constant currrent limiting, shut down DC O/P voltage 5 sec. after DC O/P voltage is down low, re-power on to recover ; DC to AC: Not accurable with power design.
Short Circuit Protection Shut down O/P current, re-power on to recover.
O.V.P. 17.6~20.8V, 33.6~39.2V, 72.6~86V, 137.157V. Protection type: Shut down, re-power on to recover
Over Themerature Prtection Shut down O/P voltage, recovers automatically after temperature goes down.
Islanding Protection Shut sown AC O/P voltage, re-power on to recover.
Remote ON-OFF Control By electrical signal or dry contact. Short: Power On, Oen: Power Off.
Bidirection Switch Time(Typ.) 1ms
Alarm Signal Isolated TTL signal output for T-Alarm, DC-OK and Fault.
Auxiliary Power 12V@0.A tolreance +/-5%, ripple 150mVp-p.
Battery Mode Rated Current(default) AC to DC 160A, 80A, 40A, 20A. Can be adjusted by communication ; DC to AC 120A, 64A, 32A, 16A. Can be adjusted by communication.
Working Temperature -30 ~ +70℃ (refer to output derating curve)
Working Humidity 20~90% RH non-condensing
Storage Temperature, Humidity -40 ~ +85℃, 10~95% RH non-condensing
Temperature Coefficient +/-0.03%/℃ (0~45℃)
Vibration 10~500Hz, 2G 10 min./1 cycle, 60 min. each along X, Y, Z axes
Safety standards UL62368-1, CAN/CSA C2.2 No. 62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, IEC62477-1(by request) approved.
Withstand voltage I/P-O/P: 3KVAC, I/P-FG: 2KVAC, O/P-FG: 500VAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25℃ / 70% RH
EMC BS EN/EN55032 ; BS EN/EN61000-3-2, 3 ; BS EN/EN61000-4-2,3,4,6,8,11 ; EN61000-6-2.
MTBF 155.56K hrs min. Telcordia SR-332 (Bellcore) ; 46K hrs min. MIL-HDBK-217F (25℃)
Model No. I/P Vol. O/P Vol. O/P Current O/P Watts (max.)
BIC-2200-12 AC180~264V / DC12V DC12V / AC180~264V 160A / 7.5A@230VAC 2160W
BIC-2200-24 AC180~264V / DC24V DC24V / AC180~264V 90A / 7.5A@230VAC 2160W
BIC-2200-48 AC180~264V / DC48V DC48V / AC180~264V 45A / 7.5A@230VAC 2160W
BIC-2200-96 AC180~264V / DC96V DC96V / AC180~264V 22.5A / 7.5A@230VAC 2160W
Mechanical Drawing (Unit: mm)


View Picture
Selected Items
Purchasing Quantity
Purchasing Schedule
Information of Contact Person
Company Information

( Including http:// )

Inquiry Detail

By submitting your contact information, you acknowledge that you consent to our processing data in accordance with the Privacy and Cookie Policy.