1W SIP Type DC/DC Converter : DR01-N

DR01-N - 1 Watt SIP Type Regulated DC-DC Converter with Isolation. This product is very suitable for use in IoT, electronic motor, information and networking, industrial control and communications equ


DC-DC Converter- Regulated - Module

1W Isolated DC-DC Converter Internal SMD Technology and UL 94V-0 package material.
  • 1W Regulated Output Power
  • UL 94V-0 Package Material
  • Efficiency Up To 73%
  • Internal Filtering
  • SIP6 Package
  • 100% Burn In
  • Internal SMD Technology
  • MTBF >1,000,000 Hours
  • 3 Years Warranty
  • No External Components Required
Input Voltage Range ± 10% / - 5% Max.
Input Filter Capacitor Type
Protection Fuse Recommended
Voltage Set-point Accuracy ± 3% max.
Temperature Coefficient ± 0.05%/°C
Ripple & Noise (20MHz BW) 100mVp-p max.
Line Regulation1 ±1.5% max.
Load Regulation2 ±1.5% max.
Minimum Load 10% of Full Load
Short Circuit Protection(Single) Current Limit protection 3min max.
Short Circuit Protection(Dual) Current Limit protection 1sec max.
Efficiency 73% min.
Short Circuit Restart Automatic
Transient Response 100uS max.
Isolation Voltage3 1500 min.
Isolation Resistance 109Ω min.
Switching Frequency 110KHz min.
Isolation Capacitance 80pF max.
Operating Temperature -40 °C To +85 °C
Cooling Free-Air Convection
Case Material Non-Conductive Plastic
Case Temperature 110 °C max.
Case Size 19.6*7.1*10.14 mm
Weigh 2.5g

Model No. I/P Vol. O/P Vol. O/P Current O/P Watts (max.)
DR01-01N 5VDC 5VDC 200mA 1W
DR01-02N 5VDC 12VDC 84mA 1W
DR01-03N 5VDC 15VDC 67mA 1W
DR01-05N 5VDC ±12VDC ±42mA 1W
DR01-06N 5VDC ±15VDC ±34mA 1W
DR01-61N 12VDC 5VDC 200mA 1W
DR01-62N 12VDC 12VDC 84mA 1W
DR01-63N 12VDC 15VDC 67mA 1W
DR01-65N 12VDC ±12VDC ±42mA 1W
DR01-66N 12VDC ±15VDC ±34mA 1W
DR01-71N 24VDC 5VDC 200mA 1W
DR01-72N 24VDC 12VDC 84mA 1W
DR01-73N 24VDC 15VDC 67mA 1W
DR01-75N 24VDC ±12VDC ±42mA 1W
DR01-76N 24VDC ±15VDC ±34mA 1W
DR01-81N 48VDC 5VDC 200mA 1W
DR01-82N 48VDC 12VDC 84mA 1W
DR01-83N 48VDC 15VDC 67mA 1W
DR01-85N 48VDC ±12VDC ±42mA 1W
DR01-86N 48VDC ±15VDC ±34mA 1W


  • High line to Low line.
  • Load Regulation is for output Load current change from 10% to 100%.
  • For 10 seconds

Ordering Information:

  1. All dimensions are in mm( inches)
  2. Pin Size is 0.50x0.30mm (0.02"x0.01")
  3. Pin is Tolerance .xx=±0.05mm
  4. Tolerance .X=±0.5mm
Mechanical Drawing (Unit: mm)


Information of Contact Person
Company Information

( Including http:// )

Inquiry Detail

By submitting your contact information, you acknowledge that you consent to our processing data in accordance with the Privacy and Cookie Policy.