90W DIP Power Module Type-AC DC Converter : FMM090 Series
FMM090 - 90W AC DC module, miniature size, PCB Mounting type
Description
Encapsulated Power
90W PCB mounting type and screw terminal type AC DC module with no load power consumption below 0.21W. High efficiency up to 93%. It can provide 100W peak power for 3 sec. The fully-potted silicone enhance the heat dissipation and meet the anti-vibration demand up to 2G by model. It is ready to solder on the PCB for several kinds of industrial、automation、handheld and mechanical equipments. It also provides the fundamental resistance to dust and moisture.Features
- Universal input 80~305VAC
- No low power consumption < 0.21W
- 3.43"x2.05" Compact Size
- Comply with EN55032 calss B without any additional components
- Protections: short circuit / overload / over voltage
- Cooling by free air convection
- Isolation class II
- Over voltage caagory III
- Operating attitude up to 4000 meters
- 100% full load burn-in test
- High reliability
- 3 years warranty
Specification
Output setup, rise time | 1000ms, 30ms/230VAC, 1000ms, 30ms/115VAC at full load |
Output hold up time (Typ.) | 30ms/230VAC, 10ms/115VAC at full load |
Input voltage | 80 ~ 305VAC |
Input frequency | 47 ~ 63 Hz |
AC current (Typ.) | 1.9A/115VAC, 1.1A/230VAC |
Inrush current (Typ.) | cold start, 30A/115VAC, 65A/230VAC |
Leakage current | < 0.25mA/240VAC |
Overload protection | 115%~160% rated output power |
Overload protection Type | Hiccup mode, recovers automatically after fault condition is removed |
Over voltage protection Type | shut down o/p voltage, re-power on to recover |
Working temperature | -30 ℃ ~ +80 ℃ (Refer to “Derating curve”) |
Working humidity | 20~90% RH non-condensing |
Storage temp. | -40 ℃ ~ +85 ℃ |
Temp. coefficient | +/- 0.03%/℃ (0 ~ 50 ℃) |
Vibration | 10~500Hz, 2G 10 min. / 1 cycle, period for 60 min. each along x, Y, Z axes |
Safety standards | UL62368-1 approved |
Withstand Voltage | I/P-O/P:4KVAC |
Isolation Resistance | I/P-O/P:100M ohms / 500VDC / 25 ℃ / 70% RH |
EMC emission | Compliance to EN55032 (CISPR32) Class B, EN61000-3-2, -3 |
EMC immunity | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55035, EN61000-6-2 |
MTBF | 310Khrs min., MIL-HDBK-217F (25 ℃) |
Dimension | PCB mounting style : 87*52*29.5mm (L*W*H) |
Packing | PCB mounting style : 0.197 kg; 60pcs/11.8kgs/0.97 CUFT |
Model
Model No. | I/P Vol. | O/P Vol. | O/P Current | O/P Watts (max.) |
FMM090-S12-P | 80 ~ 305VAC | 12 VDC | 6.7A | 90W |
FMM090-S15-P | 80~305VAC | 15 VDC | 5.67A | 90W |
FMM090-S24-P | 80 ~ 305VAC | 24 VDC | 3.75A | 90W |
FMM090-S48-P | 80 ~ 305VAC | 48 VDC | 1.88A | 90W |
Remark:
-
Peak Power:
33% Duty cycle maximum within every 30 seconds.
Average output power should not exceed the rated power.