FMM010 - 10W AC/DC miniature encapsulated power, PCB mounting type

Encapsulated Power (AC DC Module)

10W single output PCB mounting type encapsulated power. It is ready to be soldered onto the circuit board for various kind of electronic instruments. It designs to comply with EN55032 class B, the supreme EMC features keep the end electronic units from electromagnetic interference.

• Universal AC input / Full Range
• No low power consumption < 0.1W
• Compact Size
• Comply with EN55032 calss B w/o any additional components
• Protections: short circuit / overloead / over voltage
• Cooling by free air convection
• Isolation class II
• High reliability, low cost
• 3 years warranty

Output setup, rise time	600ms, 30ms at full load
Output hold up time (Typ.)	30ms/230VAC, 8ms/115VAC at full load
Input voltage	85 ~ 305VAC ; 120 ~ 430VDC
Input frequency	47 ~ 440 Hz
AC current (Typ.)	0.25A/115VAC, 0.15A/230VAC. 0.125A/277VAC
Inrush current (Typ.)	Cold Start 20A/115VAC, 40A/230VAC
Leakage current	< 0.25mA/277VAC
Overload protection	115%~190% rated output power
Overload protection Type	Hiccup mode, recovers automatically after fault condition is removed
Over voltage protection Type	shut off o/p voltage, clamping by zener diode
Working temperature	-30 ℃ ~ +70 ℃ (refer to output derating curve)
Working humidity	20~90% RH non-condensing
Storage temp., humidity	-40 ℃ ~ +85 ℃, 10~95% RH
Temp. coefficient	+/- 0.03%/℃ (0 ~ 50 ℃)
Vibration	10~500Hz, 5G 10 min. / 1 cycle, period for 60 min. each along x, Y, Z axes
Safety standards	UL62368-1, CE
Withstandard Voltage	I/P-O/P:3KVAC
Isolation Resistance	I/P-O/P:100M Ohms / 500VDC / 25 ℃ / 70% RH
EMC emission	Compliance to EN55032 (CISPR32) Class B, EN61000-3-2, -3
EMC immunity	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55035, EN61000-6-2
MTBF	1495.8Khrs min., MIL-HDBK-217F (25 ℃)
Dimension	45.7*25.4*21.5mm (L*W*H)
Packing	0.04 kg; 270pcs/11.8Kg/0.97 CUFT