30W DIP Power Module Type-AC DC Converter : FMM030 Series
  • Facebook
  • LINE
  • Twitter
  • LinkedIn
AC power module

30W DIP Power Module Type-AC DC Converter : FMM030 Series

FMM030 - 30W miniature AC power module, PCB Mounting type


Encapsulated Power (AC DC Module)

FMM030 series is a single output AC to DC PCB mounting type and screw terminial type power module with no load power consumption below 0.1W in maximum power 30W. Ready to solder on the circuit board for various kind of industrial、automation and mechanical equipments. High efficiency up to 90%.
  • Universal AC input / Full Range
  • No low power consumption < 0.1W
  • Compact Size
  • Comply with EN55032 calss B w/o any additional components
  • Protections: short circuit / overloead / over voltage
  • Cooling by free air convection
  • Isolation class II
  • High reliability, pass LPS
  • 3 years warranty
Output setup, rise time 1000ms, 30ms/230VAC, 1500ms, 30ms/115VAC at full load
Output hold up time (Typ.) 40ms/230VAC, 12ms/115VAC at full load
Input voltage 85 ~ 305VAC
Input frequency 47 ~ 440 Hz
AC current (Typ.) 0.75A/115VAC, 0.5A/230VAC, 0.375A/277VAC
Inrush current (Typ.) cold start, 25A/115VAC, 45A/230VAC
Leakage current < 0.25mA/277VAC
Overload protection 105~160% rated output power
Overload protection Type Hiccup mode, recovers automatically after fault condition is removed
Over voltage protection Type shut off o/p voltage, clamping by zener diode
Working temperature -30 ℃ ~ +70 ℃ (refer to output derating curve)
Working humidity 20~90% RH non-condensing
Storage temp., humidity -40 ℃ ~ +85 ℃, 10~95% RH
Temp. coefficient +/- 0.03%/℃ (0 ~ 50 ℃)
Vibration P:10~500Hz, 2G 10 min. / 1 cycle, period for 60 min. each along x, Y, Z axes
T:10~500Hz, 5G 10 min. / 1 cycle, period for 60 min. each along x, Y, Z axes
Safety standards UL62368-1, TUV EN62368-1 approved
Withstandard Voltage I/P-O/P:4KVAC
Isolation Resistance I/P-O/P:100M ohms / 500VDC / 25 ℃ / 70% RH
EMC emission Compliance to EN55032 (CISPR32) Class B, EN61000-3-2, -3
EMC immunity Compliance to EN61000-4-2,3,4,5,6,8,11, EN55035, EN61000-6-2
MTBF 593.3Khrs min., MIL-HDBK-217F (25 ℃)
Dimension PCB mounting style : 69.5*39*24mm (L*W*H)
Packing PCB mounting style : 0.109 kg; 144pcs/16.7kgs/0.97 CUFT

Model No. I/P Vol. O/P Vol. O/P Current O/P Watts (max.)
FMM030-S05-P 85~305VAC 5 VDC 6.0A 30W
FMM030-S12-P 85~305VAC 12 VDC 2.5A 30W
FMM030-S15-P 85~305VAC 15 VDC 2.0A 30W
FMM030-S24-P 85~305VAC 24 VDC 1.3A 30W
FMM030-S48-P 85~305VAC 48 VDC 0.63A 30W
Mechanical Drawing (Unit: mm)