FWM150 - 132-150 WATT Medical DeskTop Adapter DESKTOP TYPE MEDICAL Waterproof POWER SUPPLIES

Waterproof Medical DeskTop Adapter

The FWM150 series of AC/DC switching power supplies are for 132-150 watts of continuous output power. They are enclosed in a 94V-0 rated polycarbonate case with an IEC320/C14, C6, C8 or C18 inlet to mate with interchangeable cord for world-wide use. All models meet EN55011 class B emission limits, and are designed for medical applications.

• No load power consumption less than 0.15W
• Meet Energy Star EPS2.0 /ErP EC No 278/2009 (Lot 7)
• Meet EU CoC EPS V5 Tier 2
• With PFC circuit
• Low profile at 28mm
• Operating altitude up to 5000 meters
• Wide input range 80 to 264 VAC
• Class II model meet IEC 60601-1-11 and IP54
• Optional output connectors
• 100% burn-in
• Overvoltage protection
• Overcurrent protection
• Compliant with RoHS requirements

Input voltage	80-264 VAC
Power derating	Derate linearly from 100% at 90 VAC to 90% at 85Vac and 80% at 80 VAC
Input frequency	47-63 Hz
Input current	1.8 A (rms) for 115 VAC ; 0.9 A (rms) for 230 VAC
Earth leakage current	220 μA max. @ 264 VAC, 63 Hz
Touch current	100 μA max. @ 264 VAC, 63 Hz
Ripple and noise	1% peak to peak maximum
Over voltage protection	Provided and set at 112-140% of its nominal output voltage, latching by recycle input to reset
Short circuit protection	Automatic recovery
Over temperature protection	Latching by recycle input to reset
Temperature coefficient	±0.04% /℃ maximum
Transient response	Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change
Operating temperature	-20℃ to +60℃
Atmospheric pressure	540 hPa to 1060 hPa
Storage temperature	-40℃ to +85℃
Relative humidity	5% to 95% non-condensing
Derating	Derate from 100% at +40℃ linearly to 50% at +60℃
Ingress protection	IP54
Switching frequency	50-130 KHz
Power factor	0.98 Typical at 115 VAC
Efficiency	89% min. at full load
Hold-up time	20 ms minimum at 100 VAC
Line regulation	±0.5% maximum at full load
Inrush current	100 A @ 115 VAC or 200 A @ 230 VAC, at 25℃ cold start
Withstand voltage	4000 VAC from input to output (2 MOPP) ; 1500 VAC from input to ground (1 MOPP) ; 500 VAC from output to ground (For class II models, 4000VAC from input to output)
MTBF	100,000 hours at full load at 25℃ambient , calculated per MIL-HDBK-217F EMC Performance
EN55011	Class B conducted, class B radiated
EN61000-3-2	Harmonic distortion, class A and D
EN61000-3-3	Line flicker
EN60601-1-2
EN61000-4-2	ESD, ±15 KV air and ±8 KV contact
EN61000-4-3	Radiated immunity, 9-28 V/m
EN61000-4-4	Fast transient/burst, ±2 KV
EN61000-4-5	Surge, ±1 KV diff., ±2 KV com.
EN61000-4-6	Conducted immunity, 10 Vrms
EN61000-4-8	Magnetic field immunity, 30 A/m
EN61000-4-11	Voltage dip immunity, 30% reduction for 500 ms (criteria A @ 230VAC, criteria B @ 100VAC), 60% reduction for 100 ms (criteria A @ 230VAC, criteria B @ 100VAC) and >95% reduction for 20 ms

Ordering Information：

• Note : x for AC Inlet Type. It can be 4, 5, 6, or 8
  4 = IEC C14 ; 5 = IEC C18 ; 6 = IEC C6 ; 8 = IEC C8