1.0A Non-Isolated DC-DC Converter : DSM-78
DSM-78 - 1.0A Non-Isolated DC-DC Converter
Description
DC-DC Converter-Non-Isolated
DSM-7803 series is high efficiency switching regulators can suit to replace LM78xx / LM79xx linear regulators and its pin-out can be compatible with LM78xx / LM79xx IC. One of the key features is the model can be chosen positive or negative output voltage according to the application. It also features high efficiency up to 96% meant low power loss, wide working temperature range of –40oC up to +85℃ with no additional heat sink, compliance with EN55032 radiated Class B without external components, and so on.Features
- Single in line package
- Wide input range up to 36V
- High efficiency up to 96%
- Over temperature protection
- Over load protection
- Support negative output
- Short circuit protection
- Pin-out compatible with LM78xx / LM79xx
Specification
Input Voltage Range | 36V max. |
Surge Voltage(100ms max.) | 40V max. |
Input Filter | Capacitor type |
Internal Power Dissipation | 500mW |
Voltage Accuracy | ±3% max. |
Output Rated Power | 3.3W~15W |
Ripple & Noise | 100mVp-p max. |
Line Regulation | Others: ±0.2%; 3.3V: ±0.3% |
Load Regulation | Others: ±0.3%; 3.3V: ±0.4% |
Switching Frequency | 500KHz typ. |
Protection Short Circuit | Protection type : continuous, recovery |
Protection Overload | 200%~300%; Protection type : recovers automatically after fault condition is removed |
Protection OTP | Protection type : recovers automatically after fault condition is removed |
Cooling | Free-air convection |
Working Temperature | -40~ +85°C (refer to“Derating Curve”) |
Case Temperature | +110 °C max. |
Working Humidity | 5% ~ 95% RH non-condensing |
Storage Temp., Humidity | -55 ~ +125°C,10 ~ 95% RH non-condensing |
Temperature Coefficient | 0.03% / °C (0~71°C) |
Soldering Temperature | 1.5mm from case of 3~5 sec./265°C(max.) |
Vibration | 10~500Hz, 2G 10min./1cycle, period for 60 min. each along X, Y, Z axes |
Isolation Voltage | Non-Isolation |
EMC Emission | Parameter Standard Test Level / Note
Conducted EN55032(CISPR32) N/A Radiated EN55032(CISPR32) Class B |
EMC Immunity | Parameter Standard Test Level / Note
ESD EN61000-4-2 Air discharge ±8KV Radiated Susceptibility EN61000-4-3 3V/m EFT/Burst EN61000-4-4 ±0.5KV Surge EN61000-4-5 Line-Line ±0.5KV Conducted EN61000-4-6 3Vrms |
Weight | 2.0g for OV, OH type; 4.0g for P type; 5.5g for W type. |
Dimension(L*W*H) | Open frame size 10.5mm*7.5mm*16mm
Case size 11.5mm*9.0mm*17.5mm |
Case Material | Non-conductive plastic |
Model
Model No. | I/P Vol. | O/P Vol. | O/P Current | O/P Watts (max.) |
DSM-7803-010XX | 6~36VDC | 3.3 VDC | 1000mA | 3.3W |
DSM-7805-010XX | 8~36VDC | 5 VDC | 1000mA | 5W |
DSM-7809-010XX | 13~36VDC | 9 VDC | 1000mA | 9W |
DSM-7812-010XX | 16~36VDC | 12 VDC | 1000mA | 12W |
DSM-7815-010XX | 20~36VDC | 15 VDC | 1000mA | 15W |
DSM-7805-005XX | 8~27VDC | -5 VDC | -500mA | 2.5W |
DSM-7812-003XX | 8~20VDC | -12 VDC | -300mA | 3.6W |
DSM-7815-003XX | 8~18VDC | -15 VDC | -300mA | 4.5W |