WORLDWIDE
Home / Product Line
FPM101 - 80-100 Watt Single Output Medical Power Supplies, 80-100 Watt Single Output Medical Power Supplies : FPM101
FranMar International Inc. continually develops the innovative FPM101 - 80-100 Watt Single Output Medical Power Supplies to meet the various market demands and bring multiple benefits to customers always. Our FPM101 - 80-100 Watt Single Output Medical Power Supplies are highly demanded by our clients across the country for optimum quality. In order to ensure longer service life and reliability, our products are manufactured by our vendors using the best quality raw material and latest technology. Whether you need a FPM101 - 80-100 Watt Single Output Medical Power Supplies, or 80-100 WATT Single Output MEDICAL POWER SUPPLIES : FPM101, FPM101 - 80-100 WATT Single Output MEDICAL POWER SUPPLIES, FPM101 - 80-100 WATT Single Output MEDICAL POWER SUPPLIES, FranMar International Inc. manufactures cost-effective products.
80-100 Watt Single Output Medical Power Supplies : FPM101
FPM101 - 80-100 Watt Single Output Medical Power Supplies
Description :
Medical Open Frame
The FPM101 series of AC-DC switching power supplies in a package of 2 x 4 x 1.29 inches are capable of delivering 100 watts of continuous power at 7.5 CFM forced air cooling or 80 watts at convection cooling. The units are constructed on a printed circuit board. They are suited for medical applications. Approval to both UL60601-1 safety standard improves design-in time and reduces end equipment compliance costs.Features :
- BF class insulation
- Operation altitude up to 5000 meters
- 2 x 4 inch footprint with 1.29 inch low profile
- Less than 175 μA leakage current
- Wide input range 80-264 VAC
- Meet EN55011 /55032 and FCC Class B
- Short-circuit protection
- Compliant with RoHS requirements
- No load power consumption less than 0.15W
Specification :
Input voltage | 80-264 VAC |
Power derating | Derate linearly from 100% at 90VAC To 90% at 85VAC and 80% at 80VAC |
Input frequency | 47-63 Hz |
Input current | 2.0 A (rms) for 115 VAC ; 1.2 A (rms) for 230 VAC |
Earth leakage current | 175 μA max. @ 264 VAC, 63 Hz |
Touch current | 100 μA max. @ 264 VAC, 63 Hz |
Ripple and noise | 1% peak to peak maximum |
Over voltage protection | set at 112-140% of its nominal output voltage, latching by recycle input to reset Short circuit protection:Automatic recovery Over temperature protection:Latching by recycle input to reset. |
Temperature coefficient | All outputs ±0.04% /℃ maximum |
Transient response | Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change |
Operating temperature | 20℃ to +70℃ |
Storage temperature | -40℃ to +85℃ |
Relative humidity | 5% to 95% non-condensing |
Temperature derating | Derate from 100% at +50℃ linearly to 50% at +70℃, applicable to convection and forced-air cooling conditions Switching frequency::65 KHz (typical) |
Efficiency | See rating chart. |
Hold-up time | 10 ms minimum at 100 W load and 115 VAC ; 10 ms minimum at 80 W load and 100 VAC |
Line regulation | ±0.5% maximum at full load |
Inrush current | 80 A @ 115 VAC or 160 A @ 230 VAC, at 25℃ cold start |
Withstand voltage | 4000 VAC from input to output, 1500 VAC from input to ground, 1500 VAC from output to ground |
MTBF | 150,000 hours at full load at 25℃ ambient, calculated per MIL-HDBK-217F EMC Performance |
EN55011 /EN55022 | Class B conducted, class B radiated |
EN61000-3-2 | Harmonic distortion, class A |
EN61000-3-3 | Line flicker |
EN61000-4-2 | ESD, ±15 KV air and ±8 KV contact |
EN61000-4-3 | Radiated immunity, 10 V/m |
EN61000-4-4 | Fast transient/burst, ±2 KV |
EN61000-4-5 | Surge, ±1 KV diff., ±2 KV com |
EN61000-4-6 | Conducted immunity, 10 Vrms |
EN61000-4-8 | Magnetic field immunity, 30 A/m |
EN61000-4-11 | Voltage dip immunity, 30% reduction for 500 ms, 100% reduction for 10 ms |
Model
Model No. | I/P Vol. | O/P Vol. | O/P Current | O/P Watts(max.) |
FPM101-S120 | 80-264VAC | 12VDC | 0~6.67A(convection)/8.34A(7.5CFM) | 80W / 100W |
FPM101-S150 | 80-264VAC | 15VDC | 0~5.34A(convection)/6.67A(7.5CFM) | 80W / 100W |
FPM101-S180 | 80-264VAC | 18VDC | 0~4.45A(convection)/5.56A(7.5CFM) | 80W / 100W |
FPM101-S240 | 80-264VAC | 24VDC | 0~3.34A(convection)/4.17A(7.5CFM) | 80W / 100W |
FPM101-S280 | 80-264VAC | 28VDC | 0~2.86A(convection)/3.58A(7.5CFM) | 80W / 100W |
FPM101-S320 | 80-264VAC | 32VDC | 0~2.50A(convection)/3.13A(7.5CFM) | 80W / 100W |
FPM101-S360 | 80-264VAC | 36VDC | 0~2.23A(convection)/2.78A(7.5CFM) | 80W / 100W |
FPM101-S480 | 80-264VAC | 48VDC | 0~1.67A(convection)/2.09A(7.5CFM) | 80W / 100W |
FranMar International Inc. is the leading supplier of FPM101 - 80-100 Watt Single Output Medical Power Supplies in Taiwan and the surrounding areas. We carry inventory all the time so you’re sure we’ll have your order ready whenever you need it. We can manufacture FPM101 - 80-100 Watt Single Output Medical Power Supplies that meet specific technical requirements. FranMar International Inc. has tailored our customer service department, product designs, technical support as well as all other company departments to serve the ultimate goal of upholding the highest standards in customer satisfaction. We appreciate the opportunity to attract your attention and value your feedback.