BIC-2200 2.2 KW 具能量回收功能之交直流雙向電源, 2.2 KW Bidirectional Power Inverter : BIC-2200

Bidirectional Power Inverter

The BIC-2200 is a 2.2KW bidirectional power supply with enegy recycle function. It is fully digital and 1U height designed. It is designed to control the power transferred from AC grid to DC and DC to AC grid for energy recycle. The implementation of a bidirectional power supply of the BIC-2200 allows battey manufactures to charge the battery from AC grid and recycle the DC energy back into AC grid in one single unit. With built-in functions as active current sharing, remote ON/OFF control and CANBus mode available, the BIC-2200 provides vast design flexibility for battery formation & test equipment, V2G(Vehicle-to-grid) system, charging station, laser system and kinetic recovery system.

• 1U low profile design
• Fully digital design with 93% conversion efficiency for both AC/DC and DC/AC conversion
• Ultra-fast bidirectional time of 1ms (AC/DC ↔ DC/AC)
• CB/TUV/UL 62368-1 certified, circuit design in accordance with IEC 62477 regulation.
• Up to 5 parallel applications supported up to 11000W (4+1)
• <3% THDi in both conversion mode
• Force charging and recycle mode with CAN Bus command (Optional)
• Complete protections: Anti-islanding protection, AC anomaly protection, DC OVP, OLP, OCP, OTP
• 5-year warranty

AC to DC Direction

AC Input Voltage Range	180~264VAC
Frequency Range	47~63Hz
Power Factor (Typ.)	0.98/230VAC at full load
Efficiency (Typ.)	90~93%
AC Current (Typ.)	11A/230VAC
AC Inrush Current (Typ.)	Cold start 35A/230VAC
Leakage Current	<2mA/230VAC
Total Harmonic Distortion	< 3%(@load=100%/230VAC)
DC Voltage	12V, 24V, 48V, 96V
Rated Current	180A, 90A, 45A, 22.5A
Rated Power	2160W
Full Power Voltage Range	12~15V, 24~28V, 48~65V, 96~112V
Ripple & Noise (max.)	160mVp-p, 260mVp-p, 300mVp-p, 480mVp-p
Voltage Adj. Range	10~15V, 19~28V, 38~65V, 76~112V
Current Range	0~180A, 0~90A, 0~45A, 0~22.5A
Voltage Tolerance	+/- 1%
Line Regulation	+/- 1%
Load Regulation	+/- 0.5%
Setup, Rise Time	1800ms, 60ms/230VAC at full load

DC to AC Direction

Rated Input Power	1800W
Full Power Voltage Range	12~15V, 24~28V, 48~65V, 96~112V
DC Voltage Range	10~15V, 19~28V, 38~65V, 76~112V
Max. Input Current	150A, 75A, 37.5A, 18.75A
Rated Output Power (Typ.)(@230V, 50Hz)	1725A
Voltage Range	180~264VAC determined by AC main
Frequency Range	47~63Hz determined by AC main
AC Current (Typ.)	7.5A/230VAC
Power Factor (Typ.)	0.99/230VAC at full load
Efficiency (Typ.)	90.5~93%
Total Harmonic Distortion	< 3%(@load = 100%/230VAC)
O.L.P.	105% ~ 115% Rated output power. AC to DC: Constant currrent limiting, shut down DC O/P voltage 5 sec. after DC O/P voltage is down low, re-power on to recover ; DC to AC: Not accurable with power design.
Short Circuit Protection	Shut down O/P current, re-power on to recover.
O.V.P.	17.6~20.8V, 33.6~39.2V, 72.6~86V, 137.157V. Protection type: Shut down, re-power on to recover
Over Themerature Prtection	Shut down O/P voltage, recovers automatically after temperature goes down.
Islanding Protection	Shut sown AC O/P voltage, re-power on to recover.
Remote ON-OFF Control	By electrical signal or dry contact. Short: Power On, Oen: Power Off.
Bidirection Switch Time(Typ.)	1ms
Alarm Signal	Isolated TTL signal output for T-Alarm, DC-OK and Fault.
Auxiliary Power	12V@0.A tolreance +/-5%, ripple 150mVp-p.
Battery Mode Rated Current(default)	AC to DC 160A, 80A, 40A, 20A. Can be adjusted by communication ; DC to AC 120A, 64A, 32A, 16A. Can be adjusted by communication.
Working Temperature	-30 ~ +70℃ (refer to output derating curve)
Working Humidity	20~90% RH non-condensing
Storage Temperature, Humidity	-40 ~ +85℃, 10~95% RH non-condensing
Temperature Coefficient	+/-0.03%/℃ (0~45℃)
Vibration	10~500Hz, 2G 10 min./1 cycle, 60 min. each along X, Y, Z axes
Safety standards	UL62368-1, CAN/CSA C2.2 No. 62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, IEC62477-1(by request) approved.
Withstand voltage	I/P-O/P: 3KVAC, I/P-FG: 2KVAC, O/P-FG: 500VAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25℃ / 70% RH
EMC	BS EN/EN55032 ; BS EN/EN61000-3-2, 3 ; BS EN/EN61000-4-2,3,4,6,8,11 ; EN61000-6-2.
MTBF	155.56K hrs min. Telcordia SR-332 (Bellcore) ; 46K hrs min. MIL-HDBK-217F (25℃)