DLHR - 定電流 LED驅動器, Constant Current and Step-Down DC/DC converter : DLHR

DC/DC converter-Constant Current LED Driver

DLHR series is a high efficiency, constant current and step-down DC/DC Converter. The LED driver operates an input voltage from 12Vdc to 56Vdc and provides an externally adjustable output current up to 1000mA and an output power up to 45 watts. It is able to include the function of over temperature protection (OTP), over current protection (OCP), and 3 in 1 dimming (dim-to-off) comprised by PWM generator, 0-10Vdc interface and resistor potentiometer. Especially its outward appearance design is suitable for LED track light application.

• For 48V LED track light application
• Efficiency up to 95%
• Constant current output up to 1A
• Wide input and output voltage range
• 3 in 1 dimming (dim-to-off)
• Short circuit and over temperature protection
• Internal SMD technology
• UL 94V-0 package material

INPUT Voltage Range	12~56V
Input Filter	Capacitor type
Output Current Accuracy	±6% max. Vin=48V, 10 LEDs
Output Current Stability	±8% max. Vin=48V, 1~10 LEDs
OUTPUT Ripple & Noise	350mVp-p max.
OUTPUT Switching Frequency	40KHz~1000KHz
PWM DIMMING ON/OFF CONTROL Remote on/off(3 in 1 Dimming)::Leave open if not used ; Power on with dimming	DIM ~ -Vin >10 ~ 15Vdc or open circuit ; Power off : DIM~ -Vin < 9.5Vdc or short
PWM DIMMING ON/OFF CONTROL Remote on/off::Leave open if not used ; Power on with dimming	DIM ~ -Vin >2.5 ~ 15Vdc or open circuit ; Power off : DIM ~ -Vin < 0.3Vdc or short
PWM DIMMING ON/OFF CONTROL PWM Frequency	100~1KHz
PWM DIMMING ON/OFF CONTROL Quiescent Input Current in Shutdown Mode	4mA max. , Vin=48V
0-10 VDC DIMMING Input Voltage Range	0~15V
0-10 VDC DIMMING Control Voltage	Power on : DIM ~ -Vin >1~9Vdc ; Power off : DIM ~ -Vin < 0.9Vdc or short
ANALOGUE VOLTAGE DIMMING Input Voltage Range	0~15V
ANALOGUE VOLTAGE DIMMING Control Voltage	Power on : DIM ~ -Vin >0.5~2.5Vdc ; Power off : DIM ~ -Vin < 0.3Vdc or short
PROTECTION Short Circuit	Protection type : continuous, recovery
PROTECTION Over Temperature	Tj 150°C typically(IC1) detect on main control IC ; Protection type : Shut down, recovers automatically after temperature goes down
Cooling	Free-air convection
Working Temperature	-40~ +71°C (refer to“Derating Curve”)
Case Temperature	+110°C max.
Working Humidity	5% ~ 95% RH non-condensing
Storage Temp., Humidity	-55 ~ +125°C,10 ~ 95% RH non-condensing
Temperature Coefficient	±0.03% / °C (0~+71°C)
Soldering Temperature	1.5mm from case of 3~5 sec./265°C(max.)
Vibration	10~500Hz, 2G 10min./1cycle, period for 60 min. each along X, Y, Z axes
Isolation Voltage	Non-Isolation
Safety Standards	EAC TP TC 004 approved
EMC Emission	Compliance to EN55015
EMC Immunity	Compliance to EN61000-4-2,3,4,6,8, light industry level, criteria A
MTBF	>650,000Hours
Weight	9.5g typ.
Dimension(L*W*H)	47mm*12mm*7mm
Case Material	Non-conductive plastic