650-700 WATT MEDICAL TRIPLE OUTPUT POWER SUPPLIES : FPM650

FPM650 - 650-700 WATT MEDICAL TRIPLE OUTPUT POWER SUPPLIES

Description

Medical Open Frame

The FPM650 series comprising single and multiple output models for 650-700 watts of continuous output power is specially designed for medical applications. They operate at 90-264 VAC input voltage without the need of a selector strap. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover and fan assembly can be added during manufacturing.
Features
  • EN61000-3-2 class A and D compliant
  • Power Factor 0.98 typical
  • Overvoltage protection
  • Short-circuit protection
  • Thermal protection
  • Power Fail Detect (PFD) Signal
  • 100% burn-in at full rated load
  • Remote sense on output #1 and output #2
  • Remote inhibit – TTL high to disable output
  • Compliant with RoHS requirements
Specification
Input Voltage 90-264 VAC
Input frequency 47-63 Hz
Input Current (rms) 10 A (rms) for 115 VAC , 5 A (rms) for 230 VAC
Earth leakage current 240 μA max. @ 264 VAC, 63 Hz
Touch current 100 μA max. @ 264 VAC, 63 Hz
Output voltage/current See rating chart.
Maximum output power See rating chart.
Ripple and noise 2% peak to peak maximum on 3.3 V & 5.1 V and 1% peak to peak maximum on other voltage outputs
Overvoltage protection Provided on output #1 only; set at 115-140% of its nominal output voltage
Overcurrent protection All outputs protected to short circuit conditions
Temperature coefficient All outputs ±0.04% /℃ maximum
Transient response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change
Fan power 12 V at 400 mA maximum for B version,12 V at 100 mA maximum for C version
PFD TTL logic high for normal operation and TTL logic low upon loss of input power. This signal appears at least 1 ms prior to V1 output dropping 5% below its nominal value. This signal also provides a minimum delay of 100 ms after V1 output is within regulation.
Inhibit Requires an external TTL high level signal to inhibit outputs for standard models
Operating temperature 0℃ to +70℃
Storage temperature -40℃ to +85℃
Relative humidity 5% to 95% non-condensing
Derating Derate from 100% at +50℃, linearly to 50% at +70℃
Switching frequency 70 KHz ±10 KHz
Power factor 0.98 typical
Efficiency 80% minimum on all models
Hold-up time 12 ms minimum at 110 VAC
Line regulation ±0.2% maximum at full load
Inrush current 50 A @115 VAC or 100 A @ 230 VAC at 25℃ cold start
Withstand voltage 5600 VDC from input to output (2 MOPP) , 2100 VDC from input to ground (1 MOPP) , 700 VDC from output to ground
(To verify AC strength, get correct test method to avoid power supply damage.)
MTBF 300,000 hours minimum at full load at 25℃ ambient, calculated per MIL-HDBK- 217F
EMC Performance (IEC60601-1-2)
EN55011 Class B conducted, Class B radiated
EN61000-3-2 Harmonic distortion, Class A and D
EN61000-3-3 Line flicker
EN61000-4-2 ESD,±15 KV air and ±8 KV contact
EN61000-4-3 Radiated immunity, 10 V/m
EN61000-4-4 Fast transient/burst, ±2 KV
EN61000-4-5 Surge, ±1 KV diff.
EN61000-4-6 Conducted immunity, 10 Vrms
EN61000-4-8 Magnetic field immunity, 30 A/m
EN61000-4-11 Voltage dip immunity, 30% reduction for 500 ms, and >95% reduction for 10 ms

Model
Model No. I/P Vol. O/P Vol. O/P Current O/P Watts (max.)
FPM650-S120-z 90-264VAC 12 V 54.2 A 325W / 650W
FPM650-S150-z 90-264VAC 15 V 43.4 A 325W / 650W
FPM650-S240-z 90-264VAC 24 V 27.1 A 325W / 650W
FPM650-S270-z 90-264VAC 27 V 24.1 A 325W / 650W
FPM650-S300-z 90-264VAC 30 V 21.7 A 325W / 650W
FPM650-S360-z 90-264VAC 36 V 18.1 A 325W / 650W
FPM650-S480-z 90-264VAC 48 V 14.6 A 325W / 650W
FPM650-D020-z 90-264VAC 24 V / 12 V 1.5 A~18.0 A / 1.2 A~22 A 325W / 650W
FPM650-D021-z 90-264VAC 24 V / 15 V 1.5 A~18.0 A / 1.0 A~18 A 325W / 650W
FPM650-D022-z 90-264VAC 48 V / 24 V 0.75 A~9.0 A / 0.6 A~12 A 325W / 650W
FPM650-D023-z 90-264VAC 48 V / 12 V 0.75 A~9.0 A / 1.2 A~22 A 325W / 650W
FPM650-D024-z 90-264VAC 48 V / 15 V 0.75 A~9.0 A / 1.0 A~18 A 325W / 650W
FPM650-T030-z 90-264VAC 24 V / 12 V / 3.3 V 1.5 A~18.0 A / 1.2 A~22 A / 10 A 325W / 650W
FPM650-T031-z 90-264VAC 24 V / 15 V / 3.3 V 1.5 A~18.0 A / 1.0 A~18 A / 10 A 325W / 650W
FPM650-T032-z 90-264VAC 24 V / 12 V / 5.1 V 1.5 A~18.0 A / 1.2 A~22 A / 10 A 325W / 650W
FPM650-T033-z 90-264VAC 24 V / 15 V / 5.1 V 1.5 A~18.0 A / 1.0 A~18 A / 10 A 325W / 650W
FPM650-T034-z 90-264VAC 48 V / 12 V / 3.3 V 0.75 A~9.0 A / 1.2 A~22 A / 10 A 325W / 650W
FPM650-T035-z 90-264VAC 48 V / 15 V / 3.3 V 0.75 A~9.0 A / 1.0 A~18 A / 10 A 325W / 650W
FPM650-T036-z 90-264VAC 48 V / 12 V / 5.1 V 0.75 A~9.0 A / 1.2 A~22 A / 10 A 325W / 650W
FPM650-T037-z 90-264VAC 48 V / 15 V / 5.1 V 0.75 A~9.0 A / 1.0 A~18 A / 10 A 325W / 650W
Mechanical Drawing (Unit: mm)

Inquiry

View Picture
Selected Items
Purchasing Quantity
Purchasing Schedule
Information of Contact Person
Company Information

( Including http:// )

Inquiry Detail

By submitting your contact information, you acknowledge that you consent to our processing data in accordance with the Privacy and Cookie Policy.