600-650 WATT Single Output MEDICAL POWER SUPPLIES : FPM651
FPM651 - 600-650 WATT Single Output MEDICAL POWER SUPPLIES
Description
Medical Open Frame
The FPM651 series of AC-DC medical approved switching power supplies in a package of 4 x 8 x 2.58 inches are capable of delivering 600-650 watts of continuous power at 30 CFM forced air cooling. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover and fan assembly can be added during manufacturing. They are designed for medical applications including those needing BF rated insulation and/or an operation altitude up to 5000 meters.Features
- BF Class insulation
- Operation altitude up to 5000 meters
- 100-240 VAC input with active PFC
- Less than 300 μA leakage current
- Standby output 5VDC at 200mA
- EN55011 Class B conducted emissions
- Inhibit - TTL high to disable output
- Compliant with RoHS requirements
Specification
Input Voltage | 90-264 VAC |
Input frequency | 47-63 Hz |
Input Current (rms) | 8.4 A (rms) @115 VAC, 60 Hz ; 4.2 A (rms) @ 230 VAC, 50 Hz |
Earth leakage current | 300 μA max. @ 264 VAC, 63 Hz |
Touch current | 100 μA max. @ 264 VAC, 63 Hz |
Output voltage/current | See rating chart. |
Maximum output power | See rating chart. |
Ripple and noise | 1% peak to peak maximum |
Remote sense | Compensation for cable losses up to 0.5V |
Overvoltage protection | Set at 115-140% of nominal output voltage |
Overcurrent protection | Protected to output short circuit conditions |
Thermal shutdown | Protected to over temperature conditions |
Temperature coefficient | All outputs ±0.04% /℃ maximum |
Transient response | Maximum excursion of 4%, recovering to 1% of final value within 500 us after a 25% step load change |
Standby power | 5 V at 200 mA maximum |
Fan power | 12 V at 500 mA maximum |
Operating temperature | -10℃ to +70℃ |
Storage temperature | -40℃ to +85℃ |
Relative humidity | 5% to 95% non-condensing |
Temperature derating | Derate from 100% at +50℃ linearly to 50% at +70℃, applicable to convection and forced-air cooling conditions |
Switching frequency | 85 KHz (typical) |
Efficiency | Typical 90% |
Hold-up time | 12 ms minimum at 110 VAC & 650 W |
Line regulation | ±0.5% maximum at full load |
Inrush current | 20 A @ 115 VAC, or 40 A @ 230 VAC, at 25℃ cold start |
Withstand voltage | 4000 VAC from input to output (2 MOPP) ; 1500 VAC from input to ground (1 MOPP) ; 1500 VAC from output to ground |
MTBF | 190,000 hours at full load at 25℃ ambient, calculated per MIL-HDBK-217F EMC Performance |
EN55011 | Class B conducted, Class B radiated |
EN61000-3-2 | Harmonic distortion, Class A and D |
EN61000-3-3 | Line flicker |
EN61000-4-2 | ESD,±15 KV air and ±8 KV contact |
EN61000-4-3 | Radiated immunity, 10 V/m |
EN61000-4-4 | Fast transient/burst, ±2 KV |
EN61000-4-5 | Surge, ±1 KV diff. |
EN61000-4-6 | Conducted immunity, 10 Vrms |
EN61000-4-8 | Magnetic field immunity, 30 A/m |
EN61000-4-11 | Voltage dip immunity, 30% reduction for 500 ms, and >95% reduction for 10 ms |
PFD | TTL high for normal operation, low upon loss of input power, turn-on delay time 100-750 ms, turn-off delay time 1 ms minimum |
Inhibit | Requires an external TTL high level signal to inhibit outputs for standard models |
Model
Model No. | I/P Vol. | O/P Vol. | O/P Current | O/P Watts (max.) |
FPM651-S120-z | 90-264VAC | 12 V | 0.1 A~50.00 A(30 CFM) / 55.0 A(Peak) | 600 W |
FPM651-S150-z | 90-264VAC | 15 V | 0.1 A~40.00 A(30 CFM) / 44.0 A(Peak) | 600 W |
FPM651-S180-z | 90-264VAC | 18 V | 0.1 A~36.12 A(30 CFM) / 40.0 A(Peak) | 650 W |
FPM651-S240-z | 90-264VAC | 24 V | 0.1 A~27.09 A(30 CFM) / 30.0 A(Peak) | 650 W |
FPM651-S280-z | 90-264VAC | 28 V | 0.1 A~23.22 A(30 CFM) / 25.5 A(Peak) | 650 W |
FPM651-S300-z | 90-264VAC | 30 V | 0.1 A~21.67 A(30 CFM) / 23.8 A(Peak) | 650 W |
FPM651-S320-z | 90-264VAC | 32 V | 0.1 A~20.32 A(30 CFM) / 22.4 A(Peak) | 650 W |
FPM651-S340-z | 90-264VAC | 34 V | 0.1 A~19.12 A(30 CFM) / 21.0 A(Peak) | 650 W |
FPM651-S360-z | 90-264VAC | 36 V | 0.1 A~18.06 A(30 CFM) / 20.0 A(Peak) | 650 W |
FPM651-S480-z | 90-264VAC | 48 V | 0.1 A~13.55 A(30 CFM) / 15.0 A(Peak) | 650 W |
FPM651-S570-z | 90-264VAC | 57 V | 0.1 A~11.41 A(30 CFM) / 12.5 A(Peak) | 650 W |
FPM651-S580-z | 90-264VAC | 58 V | 0.1 A~11.21 A(30 CFM) / 12.3 A(Peak) | 650 W |