72~110 WATT MEDICAL TRIPLE OUTPUT POWER SUPPLIES : FPM110

FPM110 - 72~110 WATT MEDICAL TRIPLE OUTPUT POWER SUPPLIES

Description

Medical Open Frame

The FPM110 series of compact, open PCB constructed, AC-DC switching power supplies are specially designed for medical applications. They are capable of delivering 72-110 watts of continuous power at 25 CFM forced air cooling or 60-80 watts at convection cooling. They operate at 85-264 VAC input voltage without the need of a selector strap. All models meet the safety requirements of UL, CSA for medical equipment. FPM110-zyyy x = S, D, T or Q to denote multiple output ; S for single output, D for dual output, T for triple output, Q for Quad output, yyy to denote different output rating.
Features
  • Low safety ground leakage current
  • Meet EN55011 Class B
  • Small size, light weigh
  • 100% burn-in
  • Wide input range 85-264VAC
  • Input surge current protection
  • Overvoltage protection
  • Overcurrent protection
  • Compliant with RoHS requirements
Specification
Input voltage 85-264 VAC
Input frequency 47-63 Hz
Input current 3.20 A (rms) for 115 VAC ; 1.80 A (rms) for 230 VAC
Earth leakage current 220 μA max. @ 264 VAC, 63 Hz
Touch current 100 μA max. @ 264 VAC, 63 Hz
Output voltage/current See rating chart.
Maximum output power See rating chart.
Ripple and noise 1% peak to peak maximum
Overvoltage protection Provided on output #1 only; set at 112-132% of its nominal output voltage
Overcurrent protection All outputs protected to short circuit conditions
Temperature coefficient All outputs ±0.04% /℃ maximum
Transient response Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change
PFD TTL logic high for normal operation and TTL logic low upon loss of input power. This signal appears at least 1 ms prior to V1 output dropping 5% below its nominal value. This signal also provides a minimum delay of 100 ms after V1 is within regulation
Operating temperature -10℃ to +70℃
Storage temperature -40℃ to +85℃
Relative humidity 5% to 95% non-condensing
Derating Derate from 100% at +50℃ linearly to 50% at +70℃
Cooling 72-110 watts continuous output power at 25 CFM forced air cooling or 60-80 watts at convection cooling
Switching frequency 20-250 KHz, varied with load and line
Efficiency 70% minimum on single output model with Vo ≧12 V, 65% minimum on the others
Hold-up time 12 ms minimum at 110 VAC
Line regulation ±0.5% maximum at full load
Inrush current 15 A @ 115 VAC or 30 A @ 230 VAC, at 25℃ cold start
Withstand voltage 5600 VDC from input to output (2 MOPP) ; 2100 VDC from input to ground (1 MOPP) ; 700 VDC from output to ground(To verify AC strength, get correct test method to avoid power supply damage.)"
MTBF 400,000 hours at full load at 25℃ ambient, calculated per MIL-HDBK-217F
EMC Performance (EN60601-1-2)
EN55011 Class B conducted, class B radiated
EN61000-3-2 Harmonic distortion, class A
EN61000-3-3 Line flicker
EN61000-4-2 ESD, ±15 KV air and ±8 KV contact
EN61000-4-3 Radiated immunity, 10 V/m
EN61000-4-4 Fast transient/burst, ±2 KV
EN61000-4-5 Surge, ±1 KV diff., ±2 KV com
EN61000-4-6 Conducted immunity, 10 Vrms
EN61000-4-8 Magnetic field immunity, 30 A/m
EN61000-4-11 Voltage dip immunity, 30% reduction for 500 ms, 100% reduction for 10 ms

Model
Model No. I/P Vol. O/P Vol. O/P Current O/P Watts(max.)
FPM110-S033 85-264VAC 3.3V 0~22A 60W / 72W
FPM110-S050 85-264VAC 5.0V 0~22A 80W / 110W
FPM110-S120 85-264VAC 12V 0~9.0A 80W / 110W
FPM110-S150 85-264VAC 15V 0~7.5A 80W / 110W
FPM110-S240 85-264VAC 24V 0~4.5A 80W / 110W
FPM110-S300 85-264VAC 30V 0~3.6A 80W / 110W
FPM110-D023 85-264VAC +5.1V / +12V 0~10A/0~5A/9.0A(Ipeak) 80W / 110W
FPM110-T031 85-264VAC +5.1V / +12V / -12V 0~10A/0~5A/9.0A(Ipeak)/0~1A 80W / 110W
FPM110-T032 85-264VAC +5.1V / +15V / -15V 0~10A/0~4A/7.5A(Ipeak)/0~1A 80W / 110W
FPM110-Q040 85-264VAC +5.1V / +12V / -12V / -5V 0~10A/0~5A/9.0A(Ipeak)/0~1A/0~1A 80W / 110W
FPM110-Q041 85-264VAC +5.1V / +15V / -15V / +24V 0~10A/0~4A/7.5A(Ipeak)/0~1A/0~1A 80W / 110W
FPM110-Q042 85-264VAC +5.1V / +12V / -12V / +12V 0~10A/0~5A/9.0A(Ipeak)/0~1A/0~1A 80W / 110W
FPM110-Q045 85-264VAC +5.1V / +12V / -12V / +24V 0~10A/0~5A/9.0A(Ipeak)/0~1A/0~1A 80W / 110W
FPM110-Q045-1 85-264VAC +5.1V / +12V / -12V / +24V 2~10A/0~5A/9.0A(Ipeak)/0~1A/1.5~3A 80W / 110W
FPM110-Q045-2 85-264VAC +5.1V / +24V / -12V / +12V 0~10A/0~3A/5.0A(Ipeak)/0~1A/0~1A 80W / 110W
FPM110-Q046 85-264VAC +5.1V / +15V / -15V / -5V 0~10A/0~4A/7.5A(Ipeak)/0~1A/0~1A 80W / 110W
Mechanical Drawing (Unit: mm)

Inquiry

View Picture
Selected Items
Purchasing Quantity
Purchasing Schedule
Information of Contact Person
Company Information

( Including http:// )

Inquiry Detail

By submitting your contact information, you acknowledge that you consent to our processing data in accordance with the Privacy and Cookie Policy.