650-700 Watt Medical Triple Output Power Supplies : FPM650

FPM650 - 650-700 Watt Medical Triple Output Power Supplies

View More Details

Download (838.52 KB)

Description

Medical Open Frame

The FPM650 series comprising single and multiple output models for 650-700 watts of continuous output power is specially designed for medical applications. They operate at 90-264 VAC input voltage without the need of a selector strap. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover and fan assembly can be added during manufacturing.

Features

EN61000-3-2 class A and D compliant
Power Factor 0.98 typical
Overvoltage protection
Short-circuit protection
Thermal protection
Power Fail Detect (PFD) Signal
100% burn-in at full rated load
Remote sense on output #1 and output #2
Remote inhibit – TTL high to disable output
Compliant with RoHS requirements

Specification

Input Voltage	90-264 VAC
Input frequency	47-63 Hz
Input Current (rms)	10 A (rms) for 115 VAC , 5 A (rms) for 230 VAC
Earth leakage current	240 μA max. @ 264 VAC, 63 Hz
Touch current	100 μA max. @ 264 VAC, 63 Hz
Output voltage/current	See rating chart.
Maximum output power	See rating chart.
Ripple and noise	2% peak to peak maximum on 3.3 V & 5.1 V and 1% peak to peak maximum on other voltage outputs
Overvoltage protection	Provided on output #1 only; set at 115-140% of its nominal output voltage
Overcurrent protection	All outputs protected to short circuit conditions
Temperature coefficient	All outputs ±0.04% /℃ maximum
Transient response	Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change
Fan power	12 V at 400 mA maximum for B version,12 V at 100 mA maximum for C version
PFD	TTL logic high for normal operation and TTL logic low upon loss of input power. This signal appears at least 1 ms prior to V1 output dropping 5% below its nominal value. This signal also provides a minimum delay of 100 ms after V1 output is within regulation.
Inhibit	Requires an external TTL high level signal to inhibit outputs for standard models
Operating temperature	0℃ to +70℃
Storage temperature	-40℃ to +85℃
Relative humidity	5% to 95% non-condensing
Derating	Derate from 100% at +50℃, linearly to 50% at +70℃
Switching frequency	70 KHz ±10 KHz
Power factor	0.98 typical
Efficiency	80% minimum on all models
Hold-up time	12 ms minimum at 110 VAC
Line regulation	±0.2% maximum at full load
Inrush current	50 A @115 VAC or 100 A @ 230 VAC at 25℃ cold start
Withstand voltage	5600 VDC from input to output (2 MOPP) , 2100 VDC from input to ground (1 MOPP) , 700 VDC from output to ground (To verify AC strength, get correct test method to avoid power supply damage.)
MTBF	300,000 hours minimum at full load at 25℃ ambient, calculated per MIL-HDBK- 217F EMC Performance (IEC60601-1-2)
EN55011	Class B conducted, Class B radiated
EN61000-3-2	Harmonic distortion, Class A and D
EN61000-3-3	Line flicker
EN61000-4-2	ESD,±15 KV air and ±8 KV contact
EN61000-4-3	Radiated immunity, 10 V/m
EN61000-4-4	Fast transient/burst, ±2 KV
EN61000-4-5	Surge, ±1 KV diff.
EN61000-4-6	Conducted immunity, 10 Vrms
EN61000-4-8	Magnetic field immunity, 30 A/m
EN61000-4-11	Voltage dip immunity, 30% reduction for 500 ms, and >95% reduction for 10 ms

Model

Model No.	I/P Vol.	O/P Vol.	O/P Current	O/P Watts (max.)
FPM650-S120-z	90-264VAC	12 V	54.2 A	325W / 650W
FPM650-S150-z	90-264VAC	15 V	43.4 A	325W / 650W
FPM650-S240-z	90-264VAC	24 V	27.1 A	325W / 650W
FPM650-S270-z	90-264VAC	27 V	24.1 A	325W / 650W
FPM650-S300-z	90-264VAC	30 V	21.7 A	325W / 650W
FPM650-S360-z	90-264VAC	36 V	18.1 A	325W / 650W
FPM650-S480-z	90-264VAC	48 V	14.6 A	325W / 650W
FPM650-D020-z	90-264VAC	24 V / 12 V	1.5 A~18.0 A / 1.2 A~22 A	325W / 650W
FPM650-D021-z	90-264VAC	24 V / 15 V	1.5 A~18.0 A / 1.0 A~18 A	325W / 650W
FPM650-D022-z	90-264VAC	48 V / 24 V	0.75 A~9.0 A / 0.6 A~12 A	325W / 650W
FPM650-D023-z	90-264VAC	48 V / 12 V	0.75 A~9.0 A / 1.2 A~22 A	325W / 650W
FPM650-D024-z	90-264VAC	48 V / 15 V	0.75 A~9.0 A / 1.0 A~18 A	325W / 650W
FPM650-T030-z	90-264VAC	24 V / 12 V / 3.3 V	1.5 A~18.0 A / 1.2 A~22 A / 10 A	325W / 650W
FPM650-T031-z	90-264VAC	24 V / 15 V / 3.3 V	1.5 A~18.0 A / 1.0 A~18 A / 10 A	325W / 650W
FPM650-T032-z	90-264VAC	24 V / 12 V / 5.1 V	1.5 A~18.0 A / 1.2 A~22 A / 10 A	325W / 650W
FPM650-T033-z	90-264VAC	24 V / 15 V / 5.1 V	1.5 A~18.0 A / 1.0 A~18 A / 10 A	325W / 650W
FPM650-T034-z	90-264VAC	48 V / 12 V / 3.3 V	0.75 A~9.0 A / 1.2 A~22 A / 10 A	325W / 650W
FPM650-T035-z	90-264VAC	48 V / 15 V / 3.3 V	0.75 A~9.0 A / 1.0 A~18 A / 10 A	325W / 650W
FPM650-T036-z	90-264VAC	48 V / 12 V / 5.1 V	0.75 A~9.0 A / 1.2 A~22 A / 10 A	325W / 650W
FPM650-T037-z	90-264VAC	48 V / 15 V / 5.1 V	0.75 A~9.0 A / 1.0 A~18 A / 10 A	325W / 650W