1W SIP Type DC/DC Converter : D01
D01 - 1 Watt SIP Type DC-DC Converter with Isolation. This product is very suitable for use in IoT, electronic motor, information and networking, industrial control and communications equipments.
Description
DC-DC Converter- Isolation - Module
1W Isolated DC-DC Converter Modules without heatsink requirement and UL 94V-0 package material (94v0 power supply) .Features
- 1W Unregulated Output Power
- UL 94V-0 Package Material
- No Heatsink Required
- Single In Line Package
- 100% Burn In
- Internal SMD Technology
Specification
Input Voltage Range | ± 10% Max. |
Input Filter | Capacitor Type |
Ripple & Noise (20MHz BW) | 100mVp-p Max. |
Voltage Set-point Accuracy | ± 2% Max. |
Temperature Coefficient | ± 0.05%/°C |
Line Regulation | ±1.2% Max. |
Load Regulation | ± 8% Max. |
Short Circuit Protection | Momentary |
Efficiency | 70% min. |
Minimum Load | 20% of Full Load |
Isolation Voltage | 1500-3000 VDC Separate In to Out 1500 VDC min. Out to Out 500 VDC min. |
Isolation Resistance | 10⁹Ω min. |
Isolation Capacitance | 80pF Max. |
Switching Frequency | 100KHz Min. |
Operating Temperature | -40 °C to +71 °C |
Storage Temperature | -55 °C to +125 °C |
Humidity | 95% max. |
Case Material | Non-Conductive Plastic |
Model
Model No. | I/P Vol. | O/P Vol. | O/P Current | O/P Watts (max.) |
D01-01(A3) | 5VDC | 5 VDC | 200mA | 2W |
D01-02(A3) | 5VDC | 12 VDC | 84mA | 1W |
D01-03(A3) | 5VDC | 15 VDC | 67mA | 2W |
D01-04(A3) | 5VDC | ±5 VDC | ±100mA | 1W |
D01-05(A3) | 5VDC | ±12 VDC | ±42mA | 2W |
D01-06(A3) | 5VDC | ±15 VDC | ±34mA | 1W |
D01-61(A3) | 12VDC | 5 VDC | 200mA | 2W |
D01-62(A3) | 12VDC | 12 VDC | 84mA | 1W |
D01-63(A3) | 12VDC | 15 VDC | 67mA | 2W |
D01-64(A3) | 12VDC | ±5 VDC | ±100mA | 1W |
D01-65(A3) | 12VDC | ±12 VDC | ±42mA | 2W |
D01-66(A3) | 12VDC | ±15 VDC | ±34mA | 1W |
D01-71(A3) | 24VDC | 5 VDC | 200mA | 2W |
D01-72(A3) | 24VDC | 12 VDC | 84mA | 1W |
D01-73(A3) | 24VDC | 15 VDC | 67mA | 2W |
D01-74(A3) | 24VDC | ±5 VDC | ±100mA | 1W |
D01-75(A3) | 24VDC | ±12 VDC | ±42mA | 2W |
D01-76(A3) | 24VDC | ±15 VDC | ±34mA | 1W |
Notices:
- The standard isolation is 1500VDC.
- Suffix A3 On Model# for Isolation 3000VDC.
- D01-01~D01-66: case A ; D01-71~D01-76: case C
- D01-01~D01-66A3: case B ; D01-71A3~D01-76A3: case D
Ordering Information:
- Protection: Fuse Recommended
- MTBF > 2,000,000 Hours