40A DC UPS Module : DR-UPS40 Series
  • Facebook
  • LINE
  • Twitter
  • LinkedIn
40A DC UPS Module

40A DC UPS Module : DR-UPS40

DR-UPS40 - 40A DC UPS Module, DIN Rail Power Supply with battery controller for DIN rail UPS system


DinRail Power Supply

DR-UPS40 - 40A DC UPS Module, Miniature DIN Rail Mounting Power Supply is suitable for 24V system up to 40A.
  • Parallel connection to DC BUS
  • Suitable for 24V system up to 40A
  • Installed on DIN RAIL TS35 / 7.5 or 15
  • Built -in battery test function
  • Battery polarity protection
  • Relay contact signal output and LED indicator for DC BUS OK, battery fail, and battery discharge
  • Cooling by free air convection
  • 3 years warranty
DC input/DC bus 24~29V, 40A max.
Batter input voltage 21~29V
Battery input current 0~40A
Charger current (typ.) 2A
External battery (typ.) 24V, 4AH / 7AH / 12AH
DC bus ok Relay status: Short when DC voltage between 21~29V(±3%), relay contacts
LED (Green): DC bus OK: light ; DC bus fail: dark
Battery fail Relay status : Short when battery failure is observed through the battery test function, relay contacts
LED (Red): Battery over-discharge warning or battery broken: light ; Battery OK: dark
Battery discharge Relay status: Short when battery in discharge conditiion, relay contacts
LED (Yellow): Battery discharging: light; Battery is not discharging or discharging current<2A: dark.
Working temperature -20~+70℃
EMC standards EN55022 class B, EN61000-4-2,3,4,5,6,8, 11
Connection I/P: 2 poles, O/P: 2 poles screw DIN terminal, Signal output: 6 poles
Packing 0.55Kg; 20pcs/12Kg/1.1CUFT

Model No. I/P Vol. O/P Vol. O/P Current O/P Watts (max.)
DR-UPS40 24~29VDC 24~29 VDC 40.0A 1160W
Mechanical Drawing (Unit: mm)