FMM015 - 15W AC DC module, miniature size, PCB mounting type

Encapsulated Power (AC DC Module)

This is a single output PCB mounting type AC DC module with no load power consumption below 0.1W in maximum power 15W. High efficiency up to 83%. The fully-potted silicone enhance the heat dissipation and meet the anti-vibration demand up to 5G. Ready to solder on the circuit board for various kind of industrial、automation and mechanical equipments. It also provides the fundamental resistance to dust and moisture.

• Universal AC input / Full Range
• No low power consumption < 0.1W
• Compact Size
• 100% full load burn-in test
• Protections: short circuit / overloead / over voltage
• Cooling by free air convection
• Isolation class II
• High reliability
• 3 years warranty

Output setup, rise time	1000ms, 20ms/230VAC, 1000ms, 20ms/115VAC at full load
Output hold up time (Typ.)	85 ~ 305VAC ; 120 ~ 430VDC
Input voltage	85 ~ 305VAC ; 120 ~ 430VDC
Input frequency	47 ~ 440 Hz
AC current (Typ.)	0.35A/115VAC, 0.2A/230VAC, 0.17A/277A
Inrush current (Typ.)	Cold start 20A/115VAC, 40A/230VAC
Leakage current	< 0.25mA/277VAC
Overload protection	115 ~ 190% rated output power
Overload protection Type	Hiccup mode, recovers automatically after fault condition is removed
Over voltage protection Type	shut off o/p voltage, clamping by zener diode
Working temperature	-30 ℃ ~ +70 ℃ (Refer to "Derating Curve")
Working humidity	20~90% RH non-condensing
Storage temp., humidity	-40 ~ +85℃, 10 ~ 95% RH
Temp. coefficient	+/- 0.03%/℃ (0 ~ 50 ℃)
Vibration	10~500Hz, 5G 10 min. / 1 cycle, period for 60 min. each along x, Y, Z axes
Safety standards	UL62368-1, CE
Withstandard Voltage	I/P-O/P:3KVAC
Isolation Resistance	I/P-O/P:100M Ohms / 500VDC / 25 ℃ / 70% RH
EMC emission	Compliance to EN55032 (CISPR32) Class B, EN61000-3-2, -3
EMC immunity	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55035, EN61000-6-2
MTBF	970.3Khrs min., MIL-HDBK-217F (25 ℃)
Dimension	52.4*27.2*24mm (L*W*H)
Packing	0.059 kg; 240pcs/15.2kgs/0.97 CUFT