120W Stationary Lead-Acid Battery Charger : Px120
  • Facebook
  • LINE
  • Twitter
  • LinkedIn
Battery Charger w/PFC

120W Stationary Lead-Acid Battery Charger : Px120

Px-120 - 120 Watts Battery Charger


Battery Charger - Desktop or Open Frame Type

120W Laptop or Open Frame Type Lead-Acid Battery Charger Built-in ON/OFF power switch.
  • AC input range selectable by switch
  • Protection for deeply discharged battery
  • Short circuit / Over voltage / Over load / Over temperature Protection
  • Charger for lead-acid batteries
  • Built-in ON/OFF power switch
  • 3 poles inlet with fuse holder
  • 2 color LED loading indicator
  • EN60335 approved
  • Open Frame models available (w/o safety approval)
  • 2 years warranty
Input Voltage 88 ~ 132 / 176 ~ 264VAC selectable by SW
Inrush current (max.) Cold start, 25A at 115VAC, 50A at 230VAC
O.L.P. 90% ~ 110% constant current limiting, auto-recovery
O.V.P. 108% ~ 127% rated of output voltage
Setup, rise, hold up time 1000ms, 50ms, 16ms at full load and 230VAC
Withstand voltage I/P-O/P: 3kVAC, I/P-FG: 1.5kVAC, O/P-FG: 0.5kVAC, 1minute
Working temp. -10°C ~ 45°C, derating curve may vary for different models
Safety standard UL60950-1, TUV EN60950-1, EN60335-1, EN60335-2-29 (except for 55.2V) approved
EMC standard EN55022 Class B, EN61000-4-2,3,4,5,6,8,11, EN61000-3-2,3
Output to DC cable 6ft. of SPT-2, 18AWG x 2C
Standard output connector MIC 3P, male type (standard type)
Dimension (PCB) L144 x W90 x H35 mm
Dimension (Desktop) L180 x W96 x H49 mm
Packing (w/o PFC) 1.1 kgs ; 16 pcs / 17.9 kgs / 1.47 CUFT
Packing (w/ PFC) 1.24 kgs ; 16 pcs / 20.1 kgs / 1.47 CUFT

Model No. I/P Vol. O/P Vol. O/P Current O/P Watts (max.)
Px-120y-13C 88~132VAC / 176~264VAC 13.8 VDC 7.2A 99W
Px-120y-27C 27.6 VDC 4.3A 118W
Px-120y-54C 55.2 VDC 2.2A 121W
Px-120y-13P 88~132VAC / 176~264VAC 13.8 VDC 7.2A 99W
Px-120y-27P 27.6 VDC 4.3A 118W
Px-120y-54P 55.2 VDC 2.2A 121W


  • AC input voltage select by switch

Ordering Information :

  • Note 1: x=A (Pulse Charge) / x=B (2 section voltage charge)
  • Note 2: y=P (with PFC) / y=N (none PFC)
Mechanical Drawing (Unit: mm)