WORLDWIDE
Home / Product Line
FPM450 - 450-480 Watt Medical Triple Output Power Supplies, 450-480 Watt Medical Triple Output Power Supplies : FPM450
FranMar International Inc. has consistently maintained ours leading position in the Taiwan market with standard and special FPM450 - 450-480 Watt Medical Triple Output Power Supplies. Owing to the stringent quality policy, our FPM450 - 450-480 Watt Medical Triple Output Power Supplies meets the exact requirements of varied clients. We are one of the leading suppliers and exporters of optimum quality 450-480 WATT MEDICAL TRIPLE OUTPUT POWER SUPPLIES : FPM450, FPM450 - 450-480 WATT MEDICAL TRIPLE OUTPUT POWER SUPPLIES, FPM450 - 450-480 WATT Single Output MEDICAL POWER SUPPLIES. Also, our FPM450 - 450-480 Watt Medical Triple Output Power Supplies is illustrious in the market for its perfect designing, flawless performance, cost-effectiveness, and other such features.
450-480 Watt Medical Triple Output Power Supplies : FPM450
FPM450 - 450-480 Watt Medical Triple Output Power Supplies
Description :
Medical Open Frame
The FPM450 series comprising single and multiple output models for 450-480 watts of continuous output power is specially designed for medical applications. They operate at 90-264 VAC input voltage without the need of a selector strap. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover-and-fan assembly can be added during manufacturing.Features :
- EN61000-3-2 class A and D compliant
- Power Factor 0.98 typical
- Overvoltage protection
- Short-circuit protection
- Thermal protection
- Power Fail Detect (PFD) Signal
- 100% burn-in at full rated load
- Remote sense on output #1 and output #2
- Remote inhibit – TTL high to disable output
- Compliant with RoHS requirements
Specification :
| Input Voltage | 90-264 VAC |
| Input frequency | 47-63 Hz |
| Input Current | 7.1 A（rms）for 115 VAC ; 3.5 A（rms）for 230 VAC |
| Earth leakage current | 240 μA max.@ 264 VAC, 63 Hz |
| Touch current | 100 μA max. @ 264 VAC, 63 Hz |
| Output voltage/current | See rating chart. |
| Maximum output power | See rating chart. |
| Ripple and noise | 2% peak to peak maximum on 3.3 V & 5.1 V and 1% peak to peak maximum on other voltage outputs |
| Overvoltage protection | Provided on output #1 only; set at 115-140% of its nominal output voltage |
| Overcurrent protection | All outputs protected to short circuit conditions |
| Temperature coefficient | All outputs ±0.04% /℃ maximum |
| Transient response | Maximum excursion of 4% or better on all models, recovering to 1% of final value within 480 us after a 25% step load change |
| Fan power | 12 V at 400 mA for B version, 12 V at 100 mA for C version |
| PFD | TTL logic high for normal operation and TTL logic low upon loss of input power. This signal appears at least 1ms prior to V1 output dropping 5% below its nominal value. This signal also provides a minimum delay of 100 ms after V1 output is within regulation. |
| Inhibit | Requires an external TTL high level signal to inhibit outputs for standard models. |
| Operating temperature | 0℃ to +70℃ |
| Storage temperature | -40℃ to +85℃ |
| Relative humidity | 5% to 95% non-condensing |
| Derating | Derate from 100% at +50℃ ; linearly to 50% at +70℃ |
| Switching frequency | 60 KHz ±10 KHz |
| Power factor | 0.98 typical |
| Efficiency | 80% minimum on all models |
| Hold-up time | 12 ms minimum at 110 VAC |
| Line regulation | ±0.2% maximum at full load |
| Inrush current | 40 A @ 115 VAC or 80 A @ 230 VAC, at 25℃ cold start |
| Withstand voltage | 5600 VDC from input to output (2 MOPP) ; 2100 VDC from input to ground (1 MOPP) ; 700 VDC from output to ground (To verify AC strength, get correct test method to avoid power supply damage.) |
| MTBF | 300,000 hours at full load at 25℃ ambient, calculated per MIL-HDBK-217F EMC Performance (IEC60601-1-2) |
| EN55011/ EN55022 | Class B conducted, Class A radiated |
| EN61000-3-2 | Harmonic distortion, Class A and D |
| EN61000-3-3 | Line flicker |
| EN61000-4-2 | ESD,±15 KV air and ±8 KV contact |
| EN61000-4-3 | Radiated immunity, 10 V/m |
| EN61000-4-4 | Fast transient/burst, ±2 KV |
| EN61000-4-5 | Surge, ±1 KV diff., ±2 KV com |
| EN61000-4-6 | Conducted immunity, 10 Vrms |
| EN61000-4-8 | Magnetic field immunity, 30 A/m |
| EN61000-4-11 | Voltage dip immunity, 30% reduction for 480 ms, and >95% reduction for 10 ms |
Model
| Model No. | I/P Vol. | O/P Vol. | O/P Current | O/P Watts (max.) |
| FPM450-S120-z | 90-264VAC | 12V | 37.5 A | 225W / 450W |
| FPM450-S150-z | 90-264VAC | 15V | 30.0 A | 225W / 450W |
| FPM450-S240-z | 90-264VAC | 24V | 18.75 A | 225W / 450W |
| FPM450-S270-z | 90-264VAC | 27V | 16.7 A | 225W / 450W |
| FPM450-S300-z | 90-264VAC | 30V | 15.0 A | 225W / 450W |
| FPM450-S400-z | 90-264VAC | 40V | 12.0 A | 240W / 480W |
| FPM450-S480-z | 90-264VAC | 48V | 10.0 A | 240W / 480W |
| FPM450-S550-z | 90-264VAC | 55V | 8.73 A | 240W / 480W |
| FPM450-D020-z | 90-264VAC | 24V / 12V | 1.0 A~12.0 A / 1.00 A~17 A | 225W / 450W |
| FPM450-D021-z | 90-264VAC | 24V / 15V | 1.0 A~12.0 A / 0.75 A~15 A | 225W / 450W |
| FPM450-D022-z | 90-264VAC | 48V / 24V | 0.5 A~6.0 A / 0.50 A~10 A | 225W / 450W |
| FPM450-D023-z | 90-264VAC | 48V / 12V | 0.5 A~6.0 A / 1.00 A~17 A | 225W / 450W |
| FPM450-D024-z | 90-264VAC | 48V / 15V | 0.5 A~6.0 A / 0.75 A~15 A | 225W / 450W |
| FPM450-T030-z | 90-264VAC | 24V / 12V / 3.3V | 1.0 A~12.0 A / 1.00 A~17 A / 8 A | 225W / 450W |
| FPM450-T031-z | 90-264VAC | 24V / 15V / 3.3V | 1.0 A~12.0 A / 0.75 A~15 A / 8 A | 225W / 450W |
| FPM450-T032-z | 90-264VAC | 24V / 12V / 5.1V | 1.0 A~12.0 A / 1.00 A~17 A / 8 A | 225W / 450W |
| FPM450-T033-z | 90-264VAC | 24V / 15V / 5.1V | 1.0 A~12.0 A / 0.75 A~15 A / 8 A | 225W / 450W |
| FPM450-T034-z | 90-264VAC | 48V / 12V / 3.3V | 0.5 A~6.0 A / 1.00 A~17 A / 8 A | 225W / 450W |
| FPM450-T035-z | 90-264VAC | 48V / 15V / 3.3V | 0.5 A~6.0 A / 0.75 A~15 A / 8 A | 225W / 450W |
| FPM450-T036-z | 90-264VAC | 48V / 12V / 5.1V | 0.5 A~6.0 A / 1.00 A~17 A / 8 A | 225W / 450W |
| FPM450-T037-z | 90-264VAC | 48V / 15V / 5.1V | 0.5 A~6.0 A / 0.75 A~15 A / 8 A | 225W / 450W |
Mechanical Drawing (Unit: mm) :
FranMar International Inc. is a professional manufacturer specializes in manufacturing FPM450 - 450-480 Watt Medical Triple Output Power Supplies. In order to achieve quality management and the quality assurance requirements, we especially make the quality manual to ensure that the products are produced in accordance to meet customer requirements. Moreover, we continually develop the innovative FPM450 - 450-480 Watt Medical Triple Output Power Supplies to meet the various market demands and bring multiple benefits to customers always. Please feel free to leave us a message if you have any questions. We will reply to you as soon as possible and offer you our best services.