WORLDWIDE
Home / Product Line
FPM500F - 450-500 Watt Single Output Medical Class II Power Supplies, 450-500 Watt Single Output Medical Class II Power Supplies : FPM500F
Over the years, FranMar International Inc. achieved continuous growth by closely observing the market in order to produce customer-oriented products. Our FPM500F - 450-500 Watt Single Output Medical Class II Power Supplies is made to the same rigorous quality standards that our commercial customers demand. With the help of FPM500F - 450-500 Watt Single Output Medical Class II Power Supplies, you can easily manage and track your business. Our aim is to create a strong base for the consumers and suppliers in Taiwan and abroad, through which, a perfect chain of demand and supply can be maintained. Our company is a professional manufacturer of FPM500F - 450-500 Watt Single Output Medical Class II Power Supplies, providing 450-500 WATT Single Output MEDICAL CLASS II POWER SUPPLIES : FPM500F, FPM500F - 450-500 WATT Single Output MEDICAL CLASS II POWER SUPPLIES, FPM500F - 450-500 WATT Single Output MEDICAL CLASS II POWER SUPPLIES with top quality.
450-500 Watt Single Output Medical Class II Power Supplies : FPM500F
FPM500F - 450-500 Watt Single Output Medical Class II Power Supplies
Description :
Medical Open Frame
The FPM500F series of AC-DC medical approved switching power supplies in a package of 3.98 x 7.09 x 1.56 inches are capable of delivering 450-500 watts of continuous power at 30 CFM forced air cooling or 250 watts at convection cooling. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover and fan assembly can be added during manufacturing.Features :
- BF Class insulation
- The FPM500F model is designed for Home Health Care application
- Class II application
- Operation altitude up to 5000 meters
- 80-264 VAC input with active PFC
- Less than 100 μA leakage current
- EN55011 Class B conducted emissions
- Inhibit - TTL high to disable output
- Compliant with RoHS requirements
- Power consumption in standby mode less than 1W at standby power 5 V /100 mA
Specification :
| Input Voltage | 80-264VAC |
| Power derating | Derate linearly from 100% at 90 VAC , to 90% at 85 Vac and 80% at 80 VAC |
| Input frequency | 47-63 Hz |
| Input Current (rms) | 5.2 A (rms) @115 VAC, 60 Hz , 2.6 A (rms) @ 230 VAC, 50 Hz |
| Touch current | 100 μA max. @ 264 VAC, 63 Hz |
| Output voltage/current | See rating chart. |
| Maximum output power | See rating chart. |
| Ripple and noise | 1% peak to peak maximum |
| Remote sense | Compensation for cable losses up to 0.5V |
| Overvoltage protection | Set at 112-140% of nominal output voltage, latching by recycle input to reset |
| Short circuit protection | Automatic recovery |
| Over temperature protection | Latching by recycle input to reset |
| Temperature coefficient | All outputs ±0.04% /℃ maximum |
| Transient response | Maximum excursion of 4%, recovering to 1% of final value within 500 us after a 25% step load change |
| Standby power | 5 V at 2A maximum |
| Fan power | 12 V at 300 mA maximum |
| Operating temperature | -10℃ to +70℃ |
| Storage temperature | -40℃ to +85℃ |
| Relative humidity | 5% to 95% non-condensing |
| Temperature derating | Derate from 100% at +50℃ linearly to 50% at +70℃, applicable to convection and forced-air cooling conditions |
| Switching frequency | 85 KHz (typical) |
| Efficiency | Typical 92% |
| Hold-up time | 20 ms minimum at 110 VAC & 250 W |
| Line regulation | ±0.5% maximum at full load |
| Inrush current | 30 A @ 115 VAC, or 60 A @ 230 VAC, at 25℃ cold start |
| Withstand voltage | 4000 VAC from input to output (2 MOPP) , 4000 VAC from input to case (2 MOPP) , 1500 VAC from output to case (1 MOPP) |
| MTBF | 100,000 hours at full load at 25℃ ambient, calculated per MIL-HDBK-217F EMC Performance |
| EN55011 | Class B conducted, Class B radiated |
| EN61000-3-2 | Harmonic distortion, Class A and D |
| EN61000-3-3 | Line flicker |
| EN61000-4-2 | ESD,±15 KV air and ±8 KV contact |
| EN61000-4-3 | Radiated immunity, 10 V/m |
| EN61000-4-4 | Fast transient/burst, ±2 KV |
| EN61000-4-5 | Surge, ±1 KV diff. |
| EN61000-4-6 | Conducted immunity, 10 Vrms |
| EN61000-4-8 | Magnetic field immunity, 30 A/m |
| EN61000-4-11 | Voltage dip immunity, 30% reduction for 500 ms, and >95% reduction for 10 ms |
| PFD | TTL high for normal operation, low upon loss of input power, turn-on delay time 100-1000 ms, turn-off delay time 1 ms minimum |
| Inhibit | Requires an external TTL high level signal to inhibit outputs for standard models |
Model
| Model No. | I/P Vol. | O/P Vol. | O/P Current | O/P Watts (max.) |
| FPM500F-S120-z | 80-264VAC | 12V | 20.83A(Convection) / 37.50A(30 CFM) | 250W / 450W |
| FPM500F-S150-z | 80-264VAC | 15V | 16.67A(Convection) / 30.00A(30 CFM) | 250W / 450W |
| FPM500F-S180-z | 80-264VAC | 18V | 13.89A(Convection) / 27.78A(30 CFM) | 250W / 500W |
| FPM500F-S240-z | 80-264VAC | 24V | 10.42A(Convection) / 20.84A(30 CFM) | 250W / 500W |
| FPM500F-S280-z | 80-264VAC | 28V | 8.93A(Convection) / 17.86A(30 CFM) | 250W / 500W |
| FPM500F-S300-z | 80-264VAC | 30V | 8.34A(Convection) / 16.67A(30 CFM) | 250W / 500W |
| FPM500F-S360-z | 80-264VAC | 36V | 6.94A(Convection) / 13.89A(30 CFM) | 250W / 500W |
| FPM500F-S480-z | 80-264VAC | 48V | 5.21A(Convection) / 10.42A(30 CFM) | 250W / 500W |
| FPM500F-S570-z | 80-264VAC | 57V | 4.38A(Convection) / 8.78A(30 CFM) | 250W / 500W |
Mechanical Drawing (Unit: mm) :
Our products have always been known for quality, reliability and solid performance, making FranMar International Inc. becomes the most specified brand in the FPM500F - 450-500 Watt Single Output Medical Class II Power Supplies business. We can manufacture FPM500F - 450-500 Watt Single Output Medical Class II Power Supplies that meets specific technical requirements. If you are looking for 450-500 WATT Single Output MEDICAL CLASS II POWER SUPPLIES : FPM500F, FPM500F - 450-500 WATT Single Output MEDICAL CLASS II POWER SUPPLIES, FPM500F - 450-500 WATT Single Output MEDICAL CLASS II POWER SUPPLIES, you are in the right place. At FranMar International Inc., you will find every kind of FPM500F - 450-500 Watt Single Output Medical Class II Power Supplies that you can think of, with something for all kind of business.