WORLDWIDE
Home / Product Line
FPM650 - 650-700 Watt Single Output Medical Power Supplies, 650-700 Watt Single Output Medical Power Supplies : FPM650
FranMar International Inc. has a wide variety of FPM650 - 650-700 Watt Single Output Medical Power Supplies for many different applications. With many years of experience, we have the core technical knowledge for FPM650 - 650-700 Watt Single Output Medical Power Supplies to satisfy our customers' demands. Our FPM650 - 650-700 Watt Single Output Medical Power Supplies is known for their long work life, easy handling, and low maintenance. This has been possible with the use of the best raw materials that go into the manufacturing of our expansive product line. Thank you for visiting our website and we hope you enjoy our products as much as we do.
650-700 Watt Single Output Medical Power Supplies : FPM650
FPM650 - 650-700 Watt Single Output Medical Power Supplies
Description :
Medical Open Frame
The FPM650 series comprising single and multiple output models for 650-700 watts of continuous output power is specially designed for medical applications. They operate at 90-264 VAC input voltage without the need of a selector strap. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover and fan assembly can be added during manufacturing.Features :
- EN61000-3-2 class A and D compliant
- Power Factor 0.98 typical
- Overvoltage protection
- Short-circuit protection
- Thermal protection
- Power Fail Detect (PFD) Signal
- 100% burn-in at full rated load
- Remote sense on output #1 and output #2
- Remote inhibit – TTL high to disable output
- Compliant with RoHS requirements
Specification :
| Input Voltage | 90-264 VAC |
| Input frequency | 47-63 Hz |
| Input Current (rms) | 10 A (rms) for 115 VAC , 5 A (rms) for 230 VAC |
| Earth leakage current | 240 μA max. @ 264 VAC, 63 Hz |
| Touch current | 100 μA max. @ 264 VAC, 63 Hz |
| Output voltage/current | See rating chart. |
| Maximum output power | See rating chart. |
| Ripple and noise | 2% peak to peak maximum on 3.3 V & 5.1 V and 1% peak to peak maximum on other voltage outputs |
| Overvoltage protection | Provided on output #1 only; set at 115-140% of its nominal output voltage |
| Overcurrent protection | All outputs protected to short circuit conditions |
| Temperature coefficient | All outputs ±0.04% /℃ maximum |
| Transient response | Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change |
| Fan power | 12 V at 400 mA maximum for B version,12 V at 100 mA maximum for C version |
| PFD | TTL logic high for normal operation and TTL logic low upon loss of input power. This signal appears at least 1 ms prior to V1 output dropping 5% below its nominal value. This signal also provides a minimum delay of 100 ms after V1 output is within regulation. |
| Inhibit | Requires an external TTL high level signal to inhibit outputs for standard models |
| Operating temperature | 0℃ to +70℃ |
| Storage temperature | -40℃ to +85℃ |
| Relative humidity | 5% to 95% non-condensing |
| Derating | Derate from 100% at +50℃, linearly to 50% at +70℃ |
| Switching frequency | 70 KHz ±10 KHz |
| Power factor | 0.98 typical |
| Efficiency | 80% minimum on all models |
| Hold-up time | 12 ms minimum at 110 VAC |
| Line regulation | ±0.2% maximum at full load |
| Inrush current | 50 A @115 VAC or 100 A @ 230 VAC at 25℃ cold start |
| Withstand voltage | 5600 VDC from input to output (2 MOPP) , 2100 VDC from input to ground (1 MOPP) , 700 VDC from output to ground (To verify AC strength, get correct test method to avoid power supply damage.) |
| MTBF | 300,000 hours minimum at full load at 25℃ ambient, calculated per MIL-HDBK- 217F EMC Performance (IEC60601-1-2) |
| EN55011 | Class B conducted, Class B radiated |
| EN61000-3-2 | Harmonic distortion, Class A and D |
| EN61000-3-3 | Line flicker |
| EN61000-4-2 | ESD,±15 KV air and ±8 KV contact |
| EN61000-4-3 | Radiated immunity, 10 V/m |
| EN61000-4-4 | Fast transient/burst, ±2 KV |
| EN61000-4-5 | Surge, ±1 KV diff. |
| EN61000-4-6 | Conducted immunity, 10 Vrms |
| EN61000-4-8 | Magnetic field immunity, 30 A/m |
| EN61000-4-11 | Voltage dip immunity, 30% reduction for 500 ms, and >95% reduction for 10 ms |
Model
| Model No. | I/P Vol. | O/P Vol. | O/P Current | O/P Watts (max.) |
| FPM650-S120-z | 90-264VAC | 12 V | 54.2 A | 325W / 650W |
| FPM650-S150-z | 90-264VAC | 15 V | 43.4 A | 325W / 650W |
| FPM650-S240-z | 90-264VAC | 24 V | 27.1 A | 325W / 650W |
| FPM650-S270-z | 90-264VAC | 27 V | 24.1 A | 325W / 650W |
| FPM650-S300-z | 90-264VAC | 30 V | 21.7 A | 325W / 650W |
| FPM650-S360-z | 90-264VAC | 36 V | 18.1 A | 325W / 650W |
| FPM650-S480-z | 90-264VAC | 48 V | 14.6 A | 325W / 650W |
| FPM650-D020-z | 90-264VAC | 24 V / 12 V | 1.5 A~18.0 A / 1.2 A~22 A | 325W / 650W |
| FPM650-D021-z | 90-264VAC | 24 V / 15 V | 1.5 A~18.0 A / 1.0 A~18 A | 325W / 650W |
| FPM650-D022-z | 90-264VAC | 48 V / 24 V | 0.75 A~9.0 A / 0.6 A~12 A | 325W / 650W |
| FPM650-D023-z | 90-264VAC | 48 V / 12 V | 0.75 A~9.0 A / 1.2 A~22 A | 325W / 650W |
| FPM650-D024-z | 90-264VAC | 48 V / 15 V | 0.75 A~9.0 A / 1.0 A~18 A | 325W / 650W |
| FPM650-T030-z | 90-264VAC | 24 V / 12 V / 3.3 V | 1.5 A~18.0 A / 1.2 A~22 A / 10 A | 325W / 650W |
| FPM650-T031-z | 90-264VAC | 24 V / 15 V / 3.3 V | 1.5 A~18.0 A / 1.0 A~18 A / 10 A | 325W / 650W |
| FPM650-T032-z | 90-264VAC | 24 V / 12 V / 5.1 V | 1.5 A~18.0 A / 1.2 A~22 A / 10 A | 325W / 650W |
| FPM650-T033-z | 90-264VAC | 24 V / 15 V / 5.1 V | 1.5 A~18.0 A / 1.0 A~18 A / 10 A | 325W / 650W |
| FPM650-T034-z | 90-264VAC | 48 V / 12 V / 3.3 V | 0.75 A~9.0 A / 1.2 A~22 A / 10 A | 325W / 650W |
| FPM650-T035-z | 90-264VAC | 48 V / 15 V / 3.3 V | 0.75 A~9.0 A / 1.0 A~18 A / 10 A | 325W / 650W |
| FPM650-T036-z | 90-264VAC | 48 V / 12 V / 5.1 V | 0.75 A~9.0 A / 1.2 A~22 A / 10 A | 325W / 650W |
| FPM650-T037-z | 90-264VAC | 48 V / 15 V / 5.1 V | 0.75 A~9.0 A / 1.0 A~18 A / 10 A | 325W / 650W |
Mechanical Drawing (Unit: mm) :
FranMar International Inc. has been the world leader in manufacturing FPM650 - 650-700 Watt Single Output Medical Power Supplies, to achieve the customer's needs, we had to obtain a maximum level of performance, business, and manufacturing excellence. Renowned for their higher efficiency, accuracy and durability, our FPM650 - 650-700 Watt Single Output Medical Power Supplies is setting standards of performance and high quality in the entire market. FranMar International Inc. is committed to developing FPM650 - 650-700 Watt Single Output Medical Power Supplies that ultimately create innovative products that exceed customer expectations. Thank you for your time and business, if you have any questions or needs, please do not hesitate to contact us.