WORLDWIDE
Home / Product Line
FPM651 - 600-650 Watt Single Output Medical Power Supplies, 600-650 Watt Single Output Medical Power Supplies : FPM651
We ensure that our FPM651 - 600-650 Watt Single Output Medical Power Supplies goes through different quality tests to maintain the desired quality standards for our offerings. Alongside innovation, we maintain a great variety of essentials too, tried and tested by our loyal customers. Let FranMar International Inc. build the highest performance FPM651 - 600-650 Watt Single Output Medical Power Supplies for your applications. We can promise that whatever your FPM651 - 600-650 Watt Single Output Medical Power Supplies problem is, we will find a way to solve it to your satisfaction. If you have any questions regarding any of the services we offer, please don't hesitate to inform us. We look forward to being of service to you.
600-650 Watt Single Output Medical Power Supplies : FPM651
FPM651 - 600-650 Watt Single Output Medical Power Supplies
Description :
Medical Open Frame
The FPM651 series of AC-DC medical approved switching power supplies in a package of 4 x 8 x 2.58 inches are capable of delivering 600-650 watts of continuous power at 30 CFM forced air cooling. The units are constructed on a printed circuit board with a U-bracket for mechanical support and heat sinking. A cover and fan assembly can be added during manufacturing. They are designed for medical applications including those needing BF rated insulation and/or an operation altitude up to 5000 meters.Features :
- BF Class insulation
- Operation altitude up to 5000 meters
- 100-240 VAC input with active PFC
- Less than 300 μA leakage current
- Standby output 5VDC at 200mA
- EN55011 Class B conducted emissions
- Inhibit - TTL high to disable output
- Compliant with RoHS requirements
Specification :
| Input Voltage | 90-264 VAC |
| Input frequency | 47-63 Hz |
| Input Current (rms) | 8.4 A (rms) @115 VAC, 60 Hz ; 4.2 A (rms) @ 230 VAC, 50 Hz |
| Earth leakage current | 300 μA max. @ 264 VAC, 63 Hz |
| Touch current | 100 μA max. @ 264 VAC, 63 Hz |
| Output voltage/current | See rating chart. |
| Maximum output power | See rating chart. |
| Ripple and noise | 1% peak to peak maximum |
| Remote sense | Compensation for cable losses up to 0.5V |
| Overvoltage protection | Set at 115-140% of nominal output voltage |
| Overcurrent protection | Protected to output short circuit conditions |
| Thermal shutdown | Protected to over temperature conditions |
| Temperature coefficient | All outputs ±0.04% /℃ maximum |
| Transient response | Maximum excursion of 4%, recovering to 1% of final value within 500 us after a 25% step load change |
| Standby power | 5 V at 200 mA maximum |
| Fan power | 12 V at 500 mA maximum |
| Operating temperature | -10℃ to +70℃ |
| Storage temperature | -40℃ to +85℃ |
| Relative humidity | 5% to 95% non-condensing |
| Temperature derating | Derate from 100% at +50℃ linearly to 50% at +70℃, applicable to convection and forced-air cooling conditions |
| Switching frequency | 85 KHz (typical) |
| Efficiency | Typical 90% |
| Hold-up time | 12 ms minimum at 110 VAC & 650 W |
| Line regulation | ±0.5% maximum at full load |
| Inrush current | 20 A @ 115 VAC, or 40 A @ 230 VAC, at 25℃ cold start |
| Withstand voltage | 4000 VAC from input to output (2 MOPP) ; 1500 VAC from input to ground (1 MOPP) ; 1500 VAC from output to ground |
| MTBF | 190,000 hours at full load at 25℃ ambient, calculated per MIL-HDBK-217F EMC Performance |
| EN55011 | Class B conducted, Class B radiated |
| EN61000-3-2 | Harmonic distortion, Class A and D |
| EN61000-3-3 | Line flicker |
| EN61000-4-2 | ESD,±15 KV air and ±8 KV contact |
| EN61000-4-3 | Radiated immunity, 10 V/m |
| EN61000-4-4 | Fast transient/burst, ±2 KV |
| EN61000-4-5 | Surge, ±1 KV diff. |
| EN61000-4-6 | Conducted immunity, 10 Vrms |
| EN61000-4-8 | Magnetic field immunity, 30 A/m |
| EN61000-4-11 | Voltage dip immunity, 30% reduction for 500 ms, and >95% reduction for 10 ms |
| PFD | TTL high for normal operation, low upon loss of input power, turn-on delay time 100-750 ms, turn-off delay time 1 ms minimum |
| Inhibit | Requires an external TTL high level signal to inhibit outputs for standard models |
Model
| Model No. | I/P Vol. | O/P Vol. | O/P Current | O/P Watts (max.) |
| FPM651-S120-z | 90-264VAC | 12 V | 0.1 A~50.00 A(30 CFM) / 55.0 A(Peak) | 600 W |
| FPM651-S150-z | 90-264VAC | 15 V | 0.1 A~40.00 A(30 CFM) / 44.0 A(Peak) | 600 W |
| FPM651-S180-z | 90-264VAC | 18 V | 0.1 A~36.12 A(30 CFM) / 40.0 A(Peak) | 650 W |
| FPM651-S240-z | 90-264VAC | 24 V | 0.1 A~27.09 A(30 CFM) / 30.0 A(Peak) | 650 W |
| FPM651-S280-z | 90-264VAC | 28 V | 0.1 A~23.22 A(30 CFM) / 25.5 A(Peak) | 650 W |
| FPM651-S300-z | 90-264VAC | 30 V | 0.1 A~21.67 A(30 CFM) / 23.8 A(Peak) | 650 W |
| FPM651-S320-z | 90-264VAC | 32 V | 0.1 A~20.32 A(30 CFM) / 22.4 A(Peak) | 650 W |
| FPM651-S340-z | 90-264VAC | 34 V | 0.1 A~19.12 A(30 CFM) / 21.0 A(Peak) | 650 W |
| FPM651-S360-z | 90-264VAC | 36 V | 0.1 A~18.06 A(30 CFM) / 20.0 A(Peak) | 650 W |
| FPM651-S480-z | 90-264VAC | 48 V | 0.1 A~13.55 A(30 CFM) / 15.0 A(Peak) | 650 W |
| FPM651-S570-z | 90-264VAC | 57 V | 0.1 A~11.41 A(30 CFM) / 12.5 A(Peak) | 650 W |
| FPM651-S580-z | 90-264VAC | 58 V | 0.1 A~11.21 A(30 CFM) / 12.3 A(Peak) | 650 W |
Mechanical Drawing (Unit: mm) :
FranMar International Inc., is one of the most reputable FPM651 - 600-650 Watt Single Output Medical Power Supplies manufacturer in Taiwan and the Asia Pacific region. We use high grade quality raw materials for processing our FPM651 - 600-650 Watt Single Output Medical Power Supplies. We also customize these products in various dimensions as per the client's specified requirement and detail. Providing the end user with supply quality FPM651 - 600-650 Watt Single Output Medical Power Supplies. We have always been committed to reaching new heights in innovation, leadership and customer satisfaction. When you submit a request from this page, our best expert will respond to your question in a timely manner.